New files.

Rev: src/install-sh:1.1
Rev: src/ssh.h:1.1

src/install-sh

+#! /bin/sh
+#
+# $Id$
+#
+# install - install a program, script, or datafile
+# This comes from X11R5.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+#
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:	no input file specified"
+	exit 1
+else
+	true
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+	
+	if [ -d $dst ]; then
+		instcmd=:
+	else
+		instcmd=mkdir
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f $src -o -d $src ]
+	then
+		true
+	else
+		echo "install:  $src does not exist"
+		exit 1
+	fi
+	
+	if [ x"$dst" = x ]
+	then
+		echo "install:	no destination specified"
+		exit 1
+	else
+		true
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d $dst ]
+	then
+		dst="$dst"/`basename $src`
+	else
+		true
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='	
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp="${pathcomp}${1}"
+	shift
+
+	if [ ! -d "${pathcomp}" ] ;
+        then
+		$mkdirprog "${pathcomp}"
+	else
+		true
+	fi
+
+	pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd $dst &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		dstfile=`basename $dst $transformbasename | 
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		true
+	fi
+
+# Make a temp file name in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd $src $dsttmp &&
+
+	trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+	$doit $rmcmd -f $dstdir/$dstfile &&
+	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0
+

src/ssh.h

+/* ssh.h
+ *
+ */
+
+#ifndef LSH_SSH_H_INCLUDED
+#define LSH_SSH_H_INCLUDED
+
+/* 1-19 Transport layer generic (e.g. disconnect, ignore, debug, etc) */
+
+#define SSH_MSG_DISCONNECT             1
+#define SSH_MSG_IGNORE                 2
+#define SSH_MSG_UNIMPLEMENTED          3
+#define SSH_MSG_DEBUG                  4
+#define SSH_MSG_SERVICE_REQUEST        5
+#define SSH_MSG_SERVICE_ACCEPT         6
+
+/* 20-29 Algorithm negotiation */
+
+#define SSH_MSG_KEXINIT                20
+#define SSH_MSG_NEWKEYS                21
+
+/* 30-49 Key exchange method specific (numbers can be reused for
+ *       different authentication methods) */
+
+#define SSH_MSG_KEXDH_INIT             30
+#define SSH_MSG_KEXDH_REPLY            31
+
+/* 50-59 User authentication generic */
+
+#define SSH_MSG_USERAUTH_REQUEST 50 
+#define SSH_MSG_USERAUTH_FAILURE 51 
+#define SSH_MSG_USERAUTH_SUCCESS 52 
+#define SSH_MSG_USERAUTH_BANNER 53
+
+/* 60-79 User authentication method specific (numbers can be reused
+ * for different authentication methods) */
+
+#define SSH_MSG_USERAUTH_PK_OK 60
+#define SSH_MSG_USERAUTH_PASSWD_CHANGEREQ 60
+
+/* 80-89 Connection protocol generic */
+
+#define SSH_MSG_GLOBAL_REQUEST 80 
+#define SSH_MSG_REQUEST_SUCCESS 81 
+#define SSH_MSG_REQUEST_FAILURE 82 
+
+/* 90-127 Channel related messages */
+
+#define SSH_MSG_CHANNEL_OPEN 90 
+#define SSH_MSG_CHANNEL_OPEN_CONFIRMATION 91 
+#define SSH_MSG_CHANNEL_OPEN_FAILURE 92 
+#define SSH_MSG_CHANNEL_WINDOW_ADJUST 93 
+#define SSH_MSG_CHANNEL_DATA 94 
+#define SSH_MSG_CHANNEL_EXTENDED_DATA 95 
+#define SSH_MSG_CHANNEL_EOF 96 
+#define SSH_MSG_CHANNEL_CLOSE 97 
+#define SSH_MSG_CHANNEL_REQUEST 98 
+#define SSH_MSG_CHANNEL_SUCCESS 99 
+#define SSH_MSG_CHANNEL_FAILURE 100
+
+/* 128-191 Reserved */
+/* 192-255 Local extensions */
+
+/* Disconnecting */
+
+#define SSH_DISCONNECT_HOST_NOT_ALLOWED_TO_CONNECT      1
+#define SSH_DISCONNECT_PROTOCOL_ERROR                   2
+#define SSH_DISCONNECT_KEY_EXCHANGE_FAILED              3
+#define SSH_DISCONNECT_HOST_AUTHENTICATION_FAILED       4
+#define SSH_DISCONNECT_MAC_ERROR                        5
+#define SSH_DISCONNECT_COMPRESSION_ERROR                6
+#define SSH_DISCONNECT_SERVICE_NOT_AVAILABLE            7
+#define SSH_DISCONNECT_PROTOCOL_VERSION_NOT_SUPPORTED   8
+#define SSH_DISCONNECT_HOST_KEY_NOT_VERIFIABLE          9
+#define SSH_DISCONNECT_CONNECTION_LOST                 10
+#define SSH_DISCONNECT_BY_APPLICATION                  11
+
+/* Channels */
+#define SSH_OPEN_ADMINISTRATIVELY_PROHIBITED 1 
+#define SSH_OPEN_CONNECT_FAILED 2 
+#define SSH_OPEN_UNKNOWN_CHANNEL_TYPE 3 
+#define SSH_OPEN_RESOURCE_SHORTAGE 4
+
+/* Extended data */
+
+#define SSH_EXTENDED_DATA_STDERR 1
+
+#endif /* LSH_SSH_H_INCLUDED */