ChangeLog

2010-07-20  Niels Mller  <nisse@lysator.liu.se>

	* camellia.c: Rewrote to use 64-bit type for subkeys and use
	64-bit operations throughout. Performance on x86_32, when compiled
	with gcc-4.4.4, is reduced by roughly 15%, this should be fixed
	later.

	* camellia.h (struct camellia_ctx): Use type uint64_t for subkeys.

2010-07-07  Niels Mller  <nisse@lysator.liu.se>

	* aes.h (aes_encrypt, aes_decrypt): Declare ctx argument as const.
	Also updated implementation.
	* blowfish.h (blowfish_encrypt, blowfish_decrypt): Likewise.
	* cast128.h (cast128_encrypt, cast128_decrypt): Likewise.
	* serpent.h (serpent_encrypt, serpent_decrypt): Likewise.
	* twofish.h (twofish_encrypt, twofish_decrypt): Likewise.

	* testsuite/Makefile.in (TS_NETTLE_SOURCES): Added
	camellia-test.c.

	* examples/nettle-benchmark.c: Added camellia ciphers.

	* Makefile.in (nettle_SOURCES): Added camellia.c and
	camellia-meta.c.
	(HEADERS): Added camellia.h.

	* nettle-meta.h (nettle_camellia128): Declare.
	(nettle_camellia192): Likewise.
	(nettle_camellia256): Likewise.

	* camellia-meta.c: New file.

	* camellia.h: Rewrote interface to match nettle conventions.

	* camellia.c: Converted to nettle conventions.
	(camellia_encrypt128, camellia_encrypt256): Unified to new
	function...
	(camellia_encrypt): ...New function, with a loop doing 6
	regular rounds, one FL round and one FLINV round per iteration,
	with iteration count depending on the key size.

	(camellia_decrypt128, camellia_decrypt256): Similarly unified
	as...
	(camellia_decrypt): ...New function, analogous to
	camellia_encrypt.

2010-07-06  Niels Mller  <nisse@lysator.liu.se>

	* camellia.c, camellia.h: New files, copied from
	http://info.isl.ntt.co.jp/crypt/eng/camellia/dl/camellia-LGPL-1.2.0.tar.gz.

	* testsuite/camellia-test.c: New file.

2010-07-05  Niels Mller  <nisse@lysator.liu.se>

	* nettle.texinfo: Document new conventions for weak key and des
	parity checks. Document des_check_parity.

	* testsuite/des-test.c (test_weak): Don't check the deleted status
	attribute.

	* des-compat.c (des_key_sched): Rewrote error checking logic for
	the case of non-zero des_check_key.

	* des3.c (des3_set_key): Changed weak key detection logic.
	Complete key setup also for weak keys, and don't set the status
	attribute.

	* des.c (des_set_key): New iteration logic, to keep key pointer
	unchanged. Moved weak key check to the end, and don't set the
	status attribute.
	(des_encrypt): Ignore status attribute.
	(des_decrypt): Likewise.

	* des.h (enum des_error): Deleted.
	(struct des_ctx): Deleted status attribute.
	(struct des3_ctx): Likewise.

	* blowfish.c (initial_ctx): Deleted status value.
	(blowfish_encrypt): Ignore status attribute.
	(blowfish_decrypt): Likewise.
	(blowfish_set_key): return result from weak key check, without
	setting the status attribute.

	* blowfish.h (enum blowfish_error): Deleted.
	(struct blowfish_ctx): Deleted status attribute.

	* Makefile.in (des_headers): Deleted parity.h.

2010-06-30  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/des-test.c (test_des): New function.
	(test_weak): New function.
	(test_main): Use test_des and test_weak. Added tests for all the
	weak keys. Added some tests with invalid (to be ignored) parity
	bits.

	* des.c (parity_16): New smaller parity table.
	(des_check_parity): New function.
	(des_fix_parity): Use parity_16.
	(des_weak_p): New weak-key detection. Ignores parity bits, and
	uses a hash table.
	(des_set_key): Deleted parity checking code. Replaced old weak-key
	detection code by a call to des_weak_p.

2010-06-04  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/testutils.c (test_dsa_key): Updated for new name
	DSA_SHA1_MIN_P_BITS.

	* dsa-keygen.c (dsa_generate_keypair): Use DSA_SHA1_MIN_P_BITS and
	DSA_SHA256_MIN_P_BITS.

	* dsa.h (DSA_MIN_P_BITS, DSA_Q_OCTETS, DSA_Q_BITS): Renamed to...
	(DSA_SHA1_MIN_P_BITS, DSA_SHA1_Q_OCTETS, DSA_SHA1_Q_BITS): New
	names.

	* sexp2dsa.c (dsa_keypair_from_sexp_alist): New argument q_bits.
	Renamed parameter limit to p_max_bits.
	(dsa_sha1_keypair_from_sexp): Renamed, was dsa_keypair_from_sexp.
	Updated to call dsa_keypair_from_sexp_alist with the new argument.
	(dsa_sha256_keypair_from_sexp): New function.
	(dsa_signature_from_sexp): New argument q_bits.

	* der2dsa.c (dsa_params_from_der_iterator): Enforce 160-bit limit
	on q. Renamed parameter limit to p_max_bits.
	(dsa_openssl_private_key_from_der_iterator): Enforce 160-bit limit
	on q and x. Renamed parameter limit to p_max_bits.

2010-06-03  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/dsa-test.c (test_main): Added test for dsa-sha256.

2010-06-02  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/dsa-test.c (test_main): Provide expected value of the
	signature.

	* testsuite/testutils.c (test_dsa160): Added argument for expected
	signature.
	(test_dsa256): Likewise.

2010-06-01  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/rsa-keygen-test.c (test_main): Updated expected
	signatures.

	* examples/random-prime.c (main): Updated for nettle_random_prime
	change.
	* testsuite/random-prime-test.c (test_main): Likewise.

	* rsa-keygen.c (bignum_random_prime): Deleted function.
	(rsa_generate_keypair): Use new nettle_random_prime. Generate
	secret factors p and q with the two most significant bits set.

	* dsa-keygen.c (dsa_generate_keypair): Updated for changes in
	nettle_random_prime and _nettle_generate_pocklington_prime. Invoke
	progress callback.

	* bignum-random-prime.c (_nettle_generate_pocklington_prime): New
	argument top_bits_set, to optionally generate primes with the two
	most significant bits set. Reordered argument list.
	(nettle_random_prime): Likewise, added top_bits_set argument.
	Invoke progress callback when a prime is generated.

2010-05-26  Niels Mller  <nisse@lysator.liu.se>

	* dsa-keygen.c (dsa_generate_keypair): Use
	_nettle_generate_pocklington_prime. Deleted old key generation
	code.

	* bignum-random-prime.c (_nettle_generate_pocklington_prime): Also
	return the used r. Updated caller.

	* examples/random-prime.c (main): Allow sizes down to 3 bits.

	* bignum-random-prime.c (_nettle_generate_pocklington_prime): New
	function. Rely on mpz_probab_prime_p (for lack of a trial division
	function) for trial division.
	(nettle_random_prime): Rewritten. Uses the prime table for the
	smallest sizes, then trial division using a new set of tables, and
	then Maurer's algorithm, calling the new
	_nettle_generate_pocklington_prime for the final search.

2010-05-25  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/dsa-test.c (test_main): Updated for dsa testing
	changes.

	* testsuite/dsa-keygen-test.c (test_main): Test dsa256.

	* testsuite/testutils.h (struct nettle_mac): New struct, currently
	unused.

	* testsuite/testutils.c (test_mac): New function (currently not
	used).
	(test_dsa): Replaced by two new functions...
	(test_dsa160): New function.
	(test_dsa256): New function.
	(test_dsa_key): New argument q_size.
	(DSA_VERIFY): Generalized.

	* dsa-keygen.c (dsa_generate_keypair): Rewritten, now generating
	primes using Pocklington's theorem. Takes both p_size and q_size
	as arguments.

2010-05-20  Niels Mller  <nisse@lysator.liu.se>

	* bignum-random-prime.c (miller_rabin_pocklington): Fixed broken
	logic when Miller-rabin succeeds early.

2010-04-09  Niels Mller  <nisse@lysator.liu.se>

	* bignum-next-prime.c: Include stdlib.h, needed for alloca on
	freebsd.
	* hmac.c: Likewise.

	* examples/Makefile.in (SOURCES): Added random-prime.c.

	* examples/random-prime.c: New program.

	* testsuite/Makefile.in (TS_NETTLE_SOURCES): Moved
	knuth-lfib-test.c, cbc-test.c, ctr-test.c, hmac-test.c here, from
	TS_HOGWEED_SOURCES.
	(TS_HOGWEED_SOURCES): Added random-prime-test.c.

	* testsuite/random-prime-test.c: New test case.

	* examples/next-prime.c (main): With no command line arguments.
	exit after dislaying usage message.

	* examples/io.c (simple_random): Free buffer when done.

	* configure.ac: Changed message, say CC is the recommended
	way to configure the ABI.

	* bignum-random.c: Deleted test of HAVE_LIBGMP.
	* bignum.c: Likewise.
	* sexp2bignum.c: Likewise.

	* Makefile.in (hogweed_SOURCES): Added bignum-random-prime.c.

	* bignum-random-prime.c (nettle_random_prime): New file, new
	function.

2010-03-31  Niels Mller  <nisse@lysator.liu.se>

	* examples/nettle-benchmark.c (main): Benchmark sha224.

2010-03-30  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/testutils.c (DSA_VERIFY): Updated for dsa_sha1_verify
	rename.
	(test_dsa): Check return value from dsa_sha1_sign.

	* Makefile.in (hogweed_SOURCES): Added dsa-sha1-sign.c,
	dsa-sha1-verify.c, dsa-sha256-sign.c, and dsa-sha256-verify.c.

	* dsa.h: Updated and added dsa declarations.

	* dsa-sha256-verify.c (dsa_sha256_verify_digest): New file, new
	function.
	(dsa_sha256_verify): New function.
	* dsa-sha256-sign.c (dsa_sha256_sign_digest): New file, new
	function.
	(dsa_sha256_sign): New function.

	* dsa-sha1-verify.c (dsa_sha1_verify_digest): New file. Moved and
	renamed function, from dsa_verify_digest, rewrote to use
	_dsa_verify.
	(dsa_sha1_verify): Analogous change, renamed from dsa_verify.
	* dsa-sha1-sign.c (dsa_sha1_sign_digest): New file. Moved and
	renamed function, from dsa_sign_digest, rewrote to use _dsa_sign,
	and added return value.
	(dsa_sha1_sign): Analogous change, renamed from dsa_sign.

	* dsa-verify.c (_dsa_verify): New general verification function,
	for any hash.
	* dsa-sign.c (_dsa_sign): New general signing function, for any
	hash. Returns success code, like the rsa signture functions.

2010-03-29  Niels Mller  <nisse@lysator.liu.se>

	* configure.ac (ABI): Attempt to use a better, ABI-dependant,
	default value for libdir.

	* x86/md5-compress.asm: Fixed function name in epilogue.

	* asm.m4 (EPILOGUE): Use . to refer to current address.

	* configure.ac (ABI): Detect which ABI the compiler is using.
	On x86_64, also check for __arch64__.

2010-03-28  Niels Mller  <nisse@lysator.liu.se>

	* configure.ac (asm_path): For x86_64, check if compiler is
	generating 32-bit code.

2010-03-27  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/hmac-test.c (test_main): Rewrote rest of tests to use
	HMAC_TEST, and added more tests from Daniel Kahn Gillmor and from
	RFC 4231.

	* Makefile.in (nettle_SOURCES): Added hmac-sha224.c and
	hmac-sha384.c.

	* hmac.h: Added declarations of hmac-sha224 and hmac-sha384.

	* hmac-sha224.c: New file.

2010-03-26  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/hmac-test.c (HMAC_TEST): New macro.
	(test_main): Use HMAC_TEST for the md5 and sha1 tests, and add
	test vectors from Daniel Kahn Gillmor.

	* testsuite/Makefile.in (TS_NETTLE_SOURCES): Added sha224-test.c.

	* Makefile.in (nettle_SOURCES): Added sha224-meta.c and
	write-be32.c.
	(DISTFILES): Added nettle-write.h.

	* sha.h: Added declarations for sha224. Some are aliases for the
	corresponding sha256 definition.

	* sha256.c (sha256_digest): Use _nettle_write_be32.
	(sha224_init): New function.
	(sha224_digest): New function.

	* sha1.c (sha1_digest): Use _nettle_write_be32.

	* nettle-internal.h (NETTLE_MAX_HASH_BLOCK_SIZE)
	(NETTLE_MAX_HASH_DIGEST_SIZE): Increased, to take sha512 into
	account.

	* nettle-write.h: New file.

	* write-be32.c (_nettle_write_be32): New file, new function.

	* sha224-meta.c: New file.

2010-03-25  Niels Mller  <nisse@lysator.liu.se>

	* hmac-sha384.c: New file.

	* testsuite/sha224-test.c: New file.

	* testsuite/md4-test.c (test_main): More test vectors, provided by
	Daniel Kahn Gillmor.
	* testsuite/md5-test.c (test_main): Likewise.
	* testsuite/sha1-test.c (test_main): Likewise.
	* testsuite/sha256-test.c (test_main): Likewise.
	* testsuite/sha384-test.c (test_main): Likewise.
	* testsuite/sha512-test.c (test_main): Likewise.

	* configure.ac: Bumped version numbers. Package version
	nettle-2.1, library versions libnettle.so.3.1, libhogweed.so.2.0.

	* examples/nettle-benchmark.c (main): Benchmark sha384.

	* testsuite/Makefile.in (TS_NETTLE_SOURCES): Added sha384-test.c.

	* testsuite/sha384-test.c: New file.

	* Makefile.in (nettle_SOURCES): Added sha384-meta.c.

	* sha384-meta.c: New file.

	* sha.h: Added declarations for sha384. Some are aliases for the
	corresponding sha512 definition.

	* sha512.c (sha512_write_digest): New function.
	(sha512_digest): Use it.
	(sha384_init): New function.
	(sha384_digest): New function.

2010-03-24  Niels Mller  <nisse@lysator.liu.se>

	* sha512.c: (sha512_digest): Simplified handling of any final
	partial word of the digest.

	* sha512.c: Reorganized to use _nettle_sha512_compress.

	* sha512-compress.c (_nettle_sha512_compress): Compression
	function extracted from sha512.c to a new file.

	* Makefile.in (nettle_SOURCES): Added sha256-compress.c and
	sha512-compress.c.

	* sha256.c: Reorganized to use _nettle_sha256_compress.

	* sha256-compress.c (_nettle_sha256_compress): Compression
	function extracted from sha256.c to a new file.

	* examples/nettle-benchmark.c (main): Benchmark sha512.

	* rsa-keygen.c (rsa_generate_keypair): Ensure that bit size of e
	is less than bit size of n, and check for the unlikely case p = q.

	* rsa.h (RSA_MINIMUM_N_OCTETS, RSA_MINIMUM_N_BITS): Reduced, to
	correspond to pkcs#1 encryption of single byte messagees.

	* pgp-encode.c (pgp_put_rsa_sha1_signature): Check return value
	from rsa_sha1_sign.
	* rsa-compat.c (R_SignFinal): Likewise.

	* rsa-md5-sign.c (rsa_md5_sign): Check and propagate return value
	from pkcs1_rsa_md5_encode.
	(rsa_md5_sign_digest): Check and propagate return value from
	pkcs1_rsa_md5_encode_digest.
	* rsa-md5-verify.c (rsa_md5_verify): Check return value from
	pkcs1_rsa_md5_encode.
	(rsa_md5_verify_digest): Check return value from
	pkcs1_rsa_md5_encode_digest.
	* rsa-sha1-sign.c: Analogous changes.
	* rsa-sha1-verify.c: Analogous changes.
	* rsa-sha256-sign.c: Analogous changes.
	* rsa-sha256-verify.c: Analogous changes.
	* rsa-sha512-sign.c: Analogous changes.
	* rsa-sha512-verify.c: Analogous changes.

	* pkcs1-rsa-md5.c (pkcs1_rsa_md5_encode)
	(pkcs1_rsa_md5_encode_digest): Added return value. Check and
	propagate return value from pkcs1_signature_prefix.
	* pkcs1-rsa-sha256.c (pkcs1_rsa_sha256_encode)
	(pkcs1_rsa_sha256_encode_digest): Likewise.
	* pkcs1-rsa-sha1.c (pkcs1_rsa_sha1_encode)
	(pkcs1_rsa_sha1_encode_digest): Likewise.
	* pkcs1-rsa-sha512.c (pkcs1_rsa_sha512_encode)
	(pkcs1_rsa_sha512_encode_digest): Likewise.

	* pkcs1.c (pkcs1_signature_prefix): Interface change, take both
	the total size and digest size as arguments, and return a status
	code to say if the size was large enough.

	* testsuite/Makefile.in: Added hogweed dependency for the test
	programs.

2010-03-23  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/rsa-test.c (test_main): Test signing with sha512.

	* testsuite/testutils.c (test_rsa_sha512): New function.

	* Makefile.in (hogweed_SOURCES): Added pkcs1-rsa-sha512.c,
	rsa-sha512-sign.c and rsa-sha512-verify.c.

	* rsa.h: Added prototypes for sha512-related functions.
	(RSA_MINIMUM_N_OCTETS, RSA_MINIMUM_N_BITS): Increased.
	* pkcs1.h: Added prototypes for sha512-related functions.

	* rsa-sha512-verify.c: New file.
	* rsa-sha512-sign.c: New file.
	* pkcs1-rsa-sha512.c: New file.

2010-03-22  Niels Mller  <nisse@lysator.liu.se>

	* Makefile.in (nettle_SOURCES): Added hmac-sha512.c.

	* testsuite/hmac-test.c (test_main): Added test cases for
	hmac-sha512.

	* hmac.h: Declare functions sha512-related functions.
	* hmac-sha512.c (hmac_sha512_set_key): New file.

	Basic sha512 support.
	* testsuite/Makefile.in (TS_NETTLE_SOURCES): Added sha512-test.c.
	* testsuite/sha512-test.c: New file.

	* macros.h (READ_UINT64, WRITE_UINT64): New macros.

	* Makefile.in (nettle_SOURCES): Added sha512.c and sha512-meta.c.
	* sha.h: Added sha512-related declarations.
	* nettle-meta.h: Likewise.
	* sha512-meta.c: New file.
	* sha512.c: New file.

2010-03-06  Niels Mller  <nisse@lysator.liu.se>

	* Makefile.in (distdir): Include x86_64 assembler files.

2010-01-20  Niels Mller  <nisse@lysator.liu.se>

	* configure.ac: Check for mpz_powm_sec.

2010-01-13  Niels Mller  <nisse@lysator.liu.se>

	* Makefile.in ($(LIBHOGWEED_FORLINK)): Depend on
	$(LIBNETTLE_FORLINK).

	* configure.ac (LIBHOGWEED_LIBS): Added -lnettle -lgmp for the
	default case. Follows debian, and also makes dlopen of
	libhogweed.so work, without having to use RTLD_GLOBAL.
	(LIBHOGWEED_LINK): Added -L., to find our libnettle.so.

2009-10-21  Niels Mller  <nisse@lysator.liu.se>

	* tools/Makefile.in (pkcs1-conv$(EXEEXT)): Added dependency on
	../libhogweed.a.

2009-10-19  Niels Mller  <nisse@lysator.liu.se>

	* tools/pkcs1-conv.c: Updated for dsa/der interface change.

	* der2dsa.c (dsa_public_key_from_der_iterators): Split into two
	new functions...
	(dsa_params_from_der_iterator): New function.
	(dsa_public_key_from_der_iterator): New function.
	(dsa_openssl_private_key_from_der_iterator): Renamed, was
	dsa_private_key_from_der_iterator.
	(dsa_openssl_private_key_from_der): Likewise.
	* dsa.h: Corresponding changees to prototypes and #defines.

2009-10-12  Niels Mller  <nisse@lysator.liu.se>

	* sexp-format.c: Removed conditioning on HAVE_LIBGMP.

	* tools/pkcs1-conv.c: Support for DSA keys, contributed by Magnus
	Holmgren.

	* Makefile.in (hogweed_SOURCES): Added dsa2sexp.c and der2dsa.c.

	* der2dsa.c: New file, contributed by Magnus Holmgren.
	* dsa2sexp.c: Likewise.
	* dsa.h: Added prototypes.

	* configure.ac (LIBHOGWEED_MINOR): Bumped libhogweed minor
	version, now it's 1.1.

	* testsuite/rsa2sexp-test.c (test_main): Updated testcase for
	"rsa-pkcs1".

2009-10-11  Niels Mller  <nisse@lysator.liu.se>

	* rsa2sexp.c (rsa_keypair_to_sexp): Changed default algorithm name
	to "rsa-pkcs1".

2009-09-20  Niels Mller  <nisse@lysator.liu.se>

	* x86/sha1-compress.asm: Improved performance by 17% on AMD K7,
	by letting loopmix scramble the instruction order.

2009-09-15  Niels Mller  <nisse@lysator.liu.se>

	* x86/sha1-compress.asm: Cleanup, removing old cruft. Slight
	improvement to ROUND_F1_NOEXP. Slight reduction of
	dependency-chains.

2009-08-25  Niels Mller  <nisse@lysator.liu.se>

	* x86/sha1-compress.asm: Eliminated tmp variable for f3 rounds.

	* examples/nettle-benchmark.c (bench_sha1_compress): New function,
	for precise benchmarking of the compression function.

2009-06-08  Niels Mller  <nisse@lysator.liu.se>

	* Released nettle-2.0.

2009-06-04  Niels Mller  <nisse@lysator.liu.se>

	* configure.ac: Set version to 2.0

2009-05-30  Niels Mller  <nisse@lysator.liu.se>

	* Makefile.in (.texinfo.info): Don't use a temporary output file
	$@T, trust makeinfo to remove output file on errors.

2009-05-19  Niels Mller  <nisse@lysator.liu.se>

	* nettle.texinfo: Changed license to public domain.

2009-05-11  Niels Mller  <nisse@lysator.liu.se>

	* nettle.texinfo: Fixes from Karl Berry. Added some more index
	terms.

2009-03-06  Niels Mller  <nisse@lysator.liu.se>

	* x86_64/aes-encrypt-internal.asm: Reduced unrolling. Keep state
	in %eax--%edx only.
	* x86_64/aes-decrypt-internal.asm: Likewise.

	* x86_64/aes.m4 (MOVE_HREG): Deleted, no longer needed.
	(AES_STORE): Reduced offsets.
	(AES_ROUND): Use HREG directly, not MOVE_HREG.

	* x86_64/aes-decrypt-internal.asm: Rearrange register allocation.
	Put SA--SD in %eax--%edx, so the second byte can be accessed as
	%ah-%dh. TD is not needed, SD can be reused. Use the register that
	is saved for the outer loop counter, getting it off the stack.
	* x86_64/aes-encrypt-internal.asm: Likewise.

	* x86_64/aes.m4 (HREG, MOVE_HREG): New macros.
	(XREG): Fixed bug in handling of %r8 and %r9.
	(AES_ROUND): Use MOVE_HREG.

2009-02-10  Niels Mller  <nisse@lysator.liu.se>

	* base16-meta.c (base16_encode_update_wrapper): Mark ctx argument
	as UNUSED.

	* testsuite/sexp-conv-test: Updated testcases for improved
	handling of comments.

	* tools/sexp-conv.c (sexp_convert_item): Use sexp_put_soft_newline
	to terminate comments, and modify indentation for the case that a
	list starts with a comment.

	* tools/output.c (sexp_output_init): Initialize soft_newline.
	(sexp_put_raw_char): Clear soft_newline.
	(sexp_put_newline): Check and reset soft_newline.
	(sexp_put_soft_newline): New function.

	* tools/output.h (struct sexp_output): Removed union with single
	element, and updated all users. New attribute soft_newline.

2008-12-22  Niels Mller  <nisse@lysator.liu.se>

	* Makefile.in ($(des_headers)): Create files in $(srcdir).

2008-11-28  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/cxx-test.cxx: Include <cstdio>.

2008-11-22  Niels Mller  <nisse@lysator.liu.se>

	* yarrow256.c (yarrow256_fast_reseed): Set ctx->seeded = 1, so
	that it is set if and only if the aes context has been initialized
	with aes_set_encrypt_key.
	(yarrow256_seed): No need to set ctx->seeded here.
	(yarrow256_update): Likewise.

2008-11-04  Niels Mller  <nisse@lysator.liu.se>

	* examples/next-prime.c (main): Avoid using gmp_fprintf, to stay
	compatible with gmp-3.1.

2008-11-01  Niels Mller  <nisse@lysator.liu.se>

	* nettle.texinfo: Updated for 2.0. New section on linking.

	* nettle-types.h, nettle-meta.h: Moved all typedefs for function
	types to nettle-types.h. Use non-pointer types, so that the types
	can be used to declare functions. Updated all users.

2008-10-31  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/yarrow-test.c (test_main): Updated for seed file
	changes.

	* sha-example.c (display_hex): Use %02x, not %2x.

2008-10-30  Niels Mller  <nisse@lysator.liu.se>

	* tools/sexp-conv.c (main): Fixed file locking.

2008-10-25  Niels Mller  <nisse@lysator.liu.se>

	* configure.ac: Set version to 2.0rc1.

	* examples/Makefile.in (next-prime$(EXEEXT)): Added -lnettle to
	linker.

2008-10-24  Niels Mller  <nisse@lysator.liu.se>

	* sha256.c (ROUND): Simplified macro.

	* yarrow256.c (yarrow256_fast_reseed): Renamed (was
	yarrow_fast_reseed) and made non-static. Don't generate seed file
	here, let the application use yarrow256_random instead.
	(yarrow256_slow_reseed): Renamed (was yarrow_slow_reseed) and made
	non-static.
	(yarrow256_force_reseed): Deleted function, use
	yarrow256_slow_reseed instead. For backwards compatibility,
	yarrow.h defines yarrow256_force_reseed as an alias for that
	function.

	* yarrow.h (struct yarrow256_ctx): Deleted seed_file buffer.

2008-09-17  Niels Mller  <nisse@lysator.liu.se>

	* x86/arcfour-crypt.asm: Improved loop logic, and unrolled
	loop twice. Gave a modest speedup.

2008-09-15  Niels Mller  <nisse@lysator.liu.se>

	* yarrow256.c (yarrow256_seed): Disallow length == 0.

	* base64-decode.c (decode_table): Added vertical tab (VT) and form
	feed (FF) as white space characters.

	* x86_64/aes-decrypt-internal.asm: New file.

2008-09-13  Niels Mller  <nisse@lysator.liu.se>

	* x86/aes-encrypt-internal.asm: Replaced pushl and popl in the
	loop with movl.	Eliminated redundant movl.
	* x86/aes-decrypt-internal.asm: Likewise.

	* x86_64/aes.m4: New file.

	* x86/aes-encrypt-internal.asm: Updated for AES_FINAL_ROUND. Only
	three times through the substitution loop.
	* x86/aes-decrypt-internal.asm: Likewise.
	* x86_64/aes-encrypt-internal.asm: Likewise.

	* x86/aes.m4 (AES_FINAL_ROUND): Do the substitution on the least
	significant byte here.

	* x86/aes-encrypt-internal.asm: Updated use of AES_SUBST_BYTE. USe
	decl for outer loop.
	* x86/aes-decrypt-internal.asm: Likewise.

	* x86/aes.m4 (LREG, HREG): New macros.
	(AES_SUBST_BYTE): Take state registers as argument. Use LREG to
	get the corresponding byte register.
	(AES_ROUND): Use movzbl together with LREG and HREG.
	(AES_SUBST_BYTE): Likewise.

2008-09-10  Niels Mller  <nisse@lysator.liu.se>

	* x86_64/sha1-compress.asm: Avoid using registers %rbx and %rbp,
	which must be preserved.

2008-09-08  Niels Mller  <nisse@lysator.liu.se>

	* Makefile.in (stamp-h.in): Use $(AUTOHEADER).

	* x86_64/sha1-compress.asm: New x86_64 assembler, based on the x86
	version.

	* configure.ac (asm_path): Set up asm_path for x86_64.

	* x86_64/machine.m4: New file, new directory.

2008-08-28  Niels Mller  <nisse@lysator.liu.se>

	* examples/eratosthenes.c (main): Rewrote block-wise sieving to
	use less memory. New options -s and -v.

2008-08-27  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/sexp-conv-test (print_raw, print_nl): Use printf.
	Updated testcases with comments; comments are now preserved.

	* tools/sexp-conv.c (sexp_convert_item): Keep comments in advanced
	output.
	(parse_options): New --lock option.
	(main): Optionally lock output file.

	* tools/parse.c (sexp_check_token): Removed check for "any" token.
	All callers specify the token they expect.
	(sexp_parse): Pass on comment tokens.

	* tools/output.c (sexp_put_data): Made non-static.

	* tools/input.c (sexp_get_comment): New function.
	(sexp_get_token): Use sexp_get_comment.

	* tools/misc.h (enum sexp_token): Start enumeration with zero, zero
	is no longer used to mean any type. New type SEXP_COMMENT.

	* configure.ac: Check for fcntl file locking.

2008-08-26  Niels Mller  <nisse@lysator.liu.se>

	* Makefile.in (tags-here): Put TAGS file in the source directory.
	* examples/Makefile.in (tags): Likewise.
	* testsuite/Makefile.in (tags): Likewise.
	* tools/Makefile.in (tags): Likewise.

2008-02-29  Niels Mller  <nisse@lysator.liu.se>

	* examples/Makefile.in (SOURCES): Added next-prime.c.

2008-01-05  Niels Mller  <nisse@lysator.liu.se>

	* examples/Makefile.in (TARGETS): Added eratosthenes and next-prime.
	(next-prime, eratosthenes): New rules.
	(nettle-benchmark): Don't rely on $@.

	* examples/eratosthenes.c (find_first_one): Optimized, using
	slightly larger table.
	(main): Use atol, rather than atoi.

	* testsuite/symbols-test: Check symbols also in libhogweed.

	* examples/next-prime.c: New file.
	Deleted code for detailed timing.

	* Makefile.in (hogweed_SOURCES): Added bignum-next-prime.c.
	(DISTFILES): Added prime-list.h.
	(hogweed_OBJS): Removed $(LIBOBJS).

	* bignum-next-prime.c (nettle_next_prime): Renamed function, for
	name space reasons. Was bignum_next_prime. Updated call in
	rsa-keygen.c.
	(primes): Use prime-list.h.
	(nettle_next_prime): Skip Fermat test. Use mpz_millerrabin
	directly, rather than mpz_probab_prime_p, when the former is
	available.

	* bignum.h (nettle_next_prime): New prototype.

	* rsa-keygen.c (bignum_next_prime): Deleted, moved to
	bignum-next-prime.c. Call with a larger prime limit, this improves
	the running time of lsh-keygen by roughly 25%.

	* prime-list.h: List of odd primes < 2^16.

	* configure.ac: Check for sizeof(long).

2008-01-03  Niels Mller  <nisse@lysator.liu.se>

	* examples/nettle-benchmark.c (main): Removed incorrect UNUSED
	from declaration.

	* bignum-next-prime.c: Moved the bignum_next_prime function to a
	separate file.

2007-09-08  Niels Mller  <nisse@lysator.liu.se>

	* sparc64/aes-encrypt-internal.asm: The directory with the aes.m4
	include file was renamed from "sparc" to "sparc32". Updated include.
	* sparc64/aes-decrypt-internal.asm: Likewise.
	* sparc32/aes-encrypt-internal.asm: Likewise.
	* sparc32/aes-decrypt-internal.asm: Likewise.

2007-09-07  Niels Mller  <nisse@lysator.liu.se>

	* examples/read_rsa_key.c: Include stdlib.h.

2007-06-02  Niels Mller  <nisse@lysator.liu.se>

	* Makefile.in: Typo fixes to install targets, spotted by Magnus
	Holmgren.

2007-05-14  Niels Mller  <niels@s3.kth.se>

	* configure.ac: Fixed copy-and-paste errors in shared library
	name setup.

	* config.make.in (LIBNETTLE_SONAME, LIBHOGWEED_SONAME): Define.

	* Makefile.in (libnettle.so, libhogweed.so): Fixed rules.

	* Makefile.in: Split nettle library into two files, libnettle.a
	and libhogweed.a, and similarly for the shared libraries.

	* configure.ac: Bumped nettle so-versions to 3.0. Set hogweed
	so-versions to 1.0. New makefile conditionals IF_SHARED and
	IF_HOGWEED. Renamed WITH_PUBLIC_KEY to WITH_HOGWEED. Deleted
	SHLIBTARGET, SHLIBINSTALL, RSA_EXAMPLES and RSA_TOOLS.

	* config.make.in: Updated for hogweed split.

	* C source files: Don't use WITH_PUBLIC_KEY / WITH_HOGWEED, the
	Makefile sorts out which files should be compiled.

	* pgp.h: Include bignum.h, don't pretend to work without bignums.

	* pgp-encode.c (pgp_put_mpi, pgp_put_public_rsa_key)
	(pgp_put_rsa_sha1_signature): Define unconditionally. Removed the
	checking of HAVE_LIBGMP and WITH_PUBLIC_KEY.

	* examples/io.h: Use WITH_HOGWEED, not WITH_PUBLIC_KEY.
	* examples/io.c (read_rsa_key): Deleted, moved to...
	* examples/read_rsa_key.c: New file, extracted from io.c.

	* examples/Makefile.in: Use IF_HOGWEED instead of RSA_EXAMPLES.
	Link appropriate programs with -lhogweed.
	(SOURCES): Added read_rsa_key.c.

	* tools/Makefile.in (pkcs1-conv): Use IF_HOGWEED, not @RSA_TOOLS@,
	for configuration. Link with -lhogweed.

	* testsuite/testutils.h: Use WITH_HOGWEED, not WITH_PUBLIC_KEY.
	* testsuite/testutils.c: Likewise.

	* testsuite/Makefile.in (TS_NETTLE_SOURCES, TS_HOGWEED_SOURCES):
	Separate test cases using nettle and those also using hogweed.

2007-04-05  Niels Mller  <nisse@lysator.liu.se>

	* Moved in CVS tree. Also renamed directory sparc to sparc32.

2007-02-24  Niels Mller  <nisse@lysator.liu.se>

	* Makefile.in (clean-here): Remove .lib directory.
	(distclean-here): Remove machine.m4.

2006-12-05  Niels Mller  <nisse@lysator.liu.se>

	* configure.ac: AC_PREREQ 2.61, for AC_PROG_MKDIR_P.

	* config.make.in (datarootdir): New directory variable (for
	autoconf-2.61).

2006-11-28  Niels Mller  <nisse@lysator.liu.se>

	* configure.ac: Bumped version to 1.16.

	* Released nettle-1.15.

2006-11-27  Niels Mller  <nisse@lysator.liu.se>

	* NEWS: New entry for nettle-1.15.

	* configure.ac (SHLIBMINOR): Bumped version. Library name is now
	libnettle.so.2.6.

	* sha256.c: Changed copyright notice to use the LGPL.

	* Makefile.in (DISTFILES): Added COPYING.LIB.

	* COPYING.LIB: New file (previously only the plain GPL was
	included in the distribution).

	* nettle.texinfo: Updated vor nettle-1.15.

	* testsuite/rsa-test.c (test_main): Use test_rsa_sha256.
	* testsuite/testutils.c (test_rsa_sha256): New function.

	* testsuite/Makefile.in (DISTFILES): Replaces rfc1750.txt by
	gold-bug.txt.

	* rsa.h (rsa_sha256_sign, rsa_sha256_verify)
	(rsa_sha256_sign_digest, rsa_sha256_verify_digest): New declarations.
	(RSA_MINIMUM_N_OCTETS, RSA_MINIMUM_N_BITS): Increased to
	62 octets and  489 bits, respectively, for supporting sha256.

	* pkcs1.h (pkcs1_rsa_sha256_encode)
	(pkcs1_rsa_sha256_encode_digest): New declarations and name
	mangling symbols.

	* Makefile.in (nettle_SOURCES): Added pkcs1-rsa-sha256.c,
	rsa-sha256-sign.c, rsa-sha256-verify.c.

	* pkcs1-rsa-sha256.c, rsa-sha256-sign.c, rsa-sha256-verify.c: New
	files.

	* COPYING, INSTALL, install-sh, texinfo.tex: Updated files, from
	automake-1.10.

2006-11-27  Niels Mller  <niels@s3.kth.se>

	* tools/Makefile.in (install): Use MKDIR_P to create installation
	directory. Install only one file at a time.

	* Makefile.in (MKDIR_P): Use MKDIR_P for creating installation
	directories.

	* configure.ac: Use AC_PROG_MKDIR_P.

2006-11-24  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/yarrow-test.c (test_main): Use gold-bug.txt as input
	file, instead of rfc1750.txt.

	* testsuite/gold-bug.txt: New test input file for yarrow-test.
	The copyright on this short story by Edgar Allan Poe has expired.

	* testsuite/rfc1750.txt: Deleted file. Debian considers RFC:s
	non-free, and it was expired anyway. Replaced by gold-bug.txt.

2006-11-24  Niels Mller  <niels@s3.kth.se>

	* Almost all header files: Added C++ guards.

	* configure.ac: Test if the system has any C++ compiler.

	* config.make.in (CXX, CXXFLAGS, COMPILE_CXX, LINK_CXX): New variables.

	* testsuite/Makefile.in: New variables TS_C and TS_CXX. Setup for
	compiling the C++ file cxx-test.cxx.

	* testsuite/cxx-test.cxx: New testcase, trying to use nettle from
	a C++ program.

2006-08-28  Niels Mller  <niels@s3.kth.se>

	* index.html: Added section on language bindings.

2006-06-10  Niels Mller  <niels@s3.kth.se>

	* configure.ac: Darwin shared library support, from Grant
	Robinsson.

2006-05-18  Niels Mller  <nisse@lysator.liu.se>

	* src/nettle/x86/aes.asm: Deleted unused file.

	* aes-decrypt.c (_aes_decrypt_table): Deleted the indexing array,
	previously commented out.
	* aes-encrypt-table.c (_aes_encrypt_table): Likewise.

	* Makefile.in (.texinfo.info, .dvi.ps): Use more quotes with
	basename.
	(install-here, install-shared, install-info, install-headers): Use
	plain mkdir, not $(INSTALL) -d.

2006-05-16  Niels Mller  <niels@s3.kth.se>
	Merged from the lsh experimental branch.

2006-04-26  Niels Mller  <nisse@lysator.liu.se>

	* examples/rsa-decrypt.c: Don't include "getopt.h", since it's not used.
	* examples/nettle-benchmark.c: Include "getopt.h".

	* examples/Makefile.in (GETOPT_OBJS): New variable.
	(rsa-keygen, rsa-encrypt, nettle-benchmark): Depend on and link
	with $(GETOPT_OBJS).

	* x86/aes-decrypt-internal.asm: Use ALIGN.
	* x86/aes-encrypt-internal.asm: Likewise.
	* x86/arcfour-crypt.asm: Likewise.
	* x86/md5-compress.asm: Likewise.
	* x86/sha1-compress.asm: Likewise.

	* config.m4.in (ASM_ALIGN_LOG): Substitute.
	* configure.ac (ASM_ALIGN_LOG): Check if .align directive is
	logarithmic.
	* asm.m4 (ALIGN): New macro. Takes a logarithmic argument, and
	expands to a .align directive.

2006-04-21  Niels Mller  <nisse@lysator.liu.se>

	* nettle.texinfo (Public-key algorithms): Say that the public key
	operations are undocumented, not unsupported. Reported by Jeronimo
	Pellegrini.

2006-04-08  Niels Mller  <nisse@lysator.liu.se>

	* tools/pkcs1-conv.c (read_pem): Fixed c99-style declaration.
	Reported by Henrik Grubbstrm.

2006-01-31  Niels Mller  <niels@s3.kth.se>

	* examples/rsa-verify.c: Fixed typo in usage message.

2005-12-05  Niels Mller  <nisse@lysator.liu.se>

	* configure.ac: Bumped version to 1.15,

	* Released nettle-1.14.

	* NEWS: Updated for 1.14.

	* configure.ac (SHLIBMINOR): Increased minor number. Library
	version is now libnettle.so.2.5, soname still libnettle.so.2.

2005-11-28  Niels Mller  <nisse@lysator.liu.se>

	* config.make.in (INSTALL): Don't substitute INSTALL, INSTALL_DATA
	and friends here, to get a correct a relative filename for
	install-sh when used in tools/Makefile.

	* tools/Makefile.in (INSTALL): Substitute INSTALL, INSTALL_DATA
	and friends here.
	* Makefile.in (INSTALL): Likewise.

2005-11-27  Niels Mller  <nisse@lysator.liu.se>

	* Makefile.in (.texinfo.pdf): New rule. Avoid dependency on
	intermediate .dvi and .ps files.

	* testsuite/Makefile.in (clean): Delete sha1-huge-test.

	* Makefile.in (install-info, install-headers): Don't use $< and
	$?; Solaris make doesn't support them in explicit rules.

2005-11-26  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/Makefile.in: Include .test-rules.make, which contains
	the rules for all the test executables.
	(test-rules): New rule, to update this file.
	(DISTFILES): Added $(EXTRA_SOURCES).

	* testsuite/.test-rules.make: Automatically generated file for
	building the test programs.

2005-11-25  Niels Mller  <nisse@lysator.liu.se>

	* configure.ac: Disable assembler when compiling with rntcl.

	* tools/Makefile.in (pkcs1_conv_SOURCES): New variable.
	(pkcs1-conv): Link with getopt.o and getopt1.o.

	* Makefile.in (aesdata, desdata, shadata): Use explicit rules for
	executables.

	* testsuite/Makefile.in: Use %-rules for building the -test
	executables, in addition to the suffix rules. Hopefully, this
	should make all of GNU make, BSD make and Solaris make happy.
	Use $(EXEEXT) and $(OBJEXT) more consistently.

	* examples/Makefile.in: Use explicit rules for all executable
	targets. Use $(EXEEXT) and $(OBJEXT) more consistently.

2005-11-25  Niels Mller  <niels@s3.kth.se>

	* testsuite/Makefile.in: Avoid using single-suffix rule to build
	executables.

2005-11-24  Niels Mller  <niels@s3.kth.se>

	* Makefile.in (distdir): Use [ -f, not [ -e, since the latter
	is less portable, and not supported by Solaris /bin/sh.

2005-11-23  Niels Mller  <niels@s3.kth.se>

	* testsuite/Makefile.in (DISTFILES): Added teardown-env.
	* testsuite/teardown-env: New file. Delete files created by the
	testsuite.

2005-11-21  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/testutils.c (main): Fixed check for -v option. Spotted
	by Goran K.

2005-11-21  Niels Mller  <niels@s3.kth.se>

	* ctr.h (CTR_CTX, CTR_CRYPT): Fixed bugs, spotted by Goran K.

2005-11-20  Niels Mller  <nisse@lysator.liu.se>

	* Makefile.in (nettle_SOURCES): Added der2rsa.c.

	* testsuite/Makefile.in (TS_SH): Added pkcs1-conv-test.

	* tools/Makefile.in (TARGETS): Added @RSA_TOOLS@.
	(SOURCES): Added pkcs1-conv.c.
	(pkcs1-conv): New rule.

	* tools/pkcs1-conv.c: New program.

	* testsuite/pkcs1-conv-test: New file.

	* examples/rsa-verify-test: Use rsa-sign to create signature.

	* examples/io.c (read_file): Fixed spelling in error message.

	* rsa.h (rsa_public_key_from_der_iterator)
	(rsa_private_key_from_der_iterator, rsa_keypair_from_der): Declare
	functions.

	* der2rsa.c: New file.

	* der-iterator.c (asn1_der_iterator_init): Initialize length and
	data.
	(asn1_der_iterator_next): Support for lengths >= 0x80.
	(asn1_der_decode_constructed_last, asn1_der_decode_bitstring)
	(asn1_der_decode_bitstring_last): New functions.
	(asn1_der_get_bignum): Check for non-mininal encodings.

	* configure.ac (RSA_TOOLS): New substituted variable. Includes
	pkcs1-conv, when public-key support is enabled.

	* bignum.h (nettle_asn1_der_get_bignum): Include nettle_-prefix in
	declaration.

	* asn1.h: Added name mangling defines, and a few new declarations.

2005-11-13  Niels Mller  <nisse@lysator.liu.se>

	* Makefile.in (nettle_SOURCES): Added der-iterator.c.
	(HEADERS): Added asn1.h.

	* bignum.h (asn1_der_get_bignum): Declare function.

	* der-iterator.c: New file.
	* asn1.h: New file.

2005-11-07  Niels Mller  <nisse@lysator.liu.se>

	* examples/nettle-benchmark.c: Check HAVE_UNISTD_H.

	* examples/Makefile.in (TARGETS): Use $(EXEEXT).
	* tools/Makefile.in (TARGETS, sexp-conv, nettle-lfib-stream): Likewise.

	* configure.ac: Use $host_cpu, not $host, when setting up the
	assembler path. Use $host_os, not uname, when setting up shared
	library flags.

	* Makefile.in (des.$(OBJEXT)): Use OBJEXT.

	* config.guess, config.sub: In the CVS tree, moved files to the
	lsh top-level directory.

2005-10-23  Niels Mller  <nisse@lysator.liu.se>

	* sparc64/arcfour-crypt.asm: New file, almost the same as
	sparc/arcfour-crypt.asm.

	* examples/nettle-benchmark.c (display): Use two decimal places.

	* sparc/arcfour-crypt.asm: Reorganized. Main loop unrolled four
	times. Uses aligned 32-bit write accesses at DST. Still uses 8-bit
	read accesses at SRC; could be improved int he case that SRC and
	DST have compatible alignment.

2005-10-19  Niels Mller  <niels@s3.kth.se>

	* testsuite/arcfour-test.c (test_main): New testcase with 512
	bytes of data.

2005-10-19  Niels Mller  <nisse@lysator.liu.se>

	* sparc/arcfour-crypt.asm: Fixed bug, spotted by Mikael Kalms. We
	must order the store at [CTX+I] before the load of [CTX+SI+SJ].

2005-10-18  Niels Mller  <nisse@lysator.liu.se>

	* sparc/arcfour-crypt.asm: Special unrolled code if SRC and DST
	have compatible alignment. Improves performance by 20%, but I'm
	not sure it's worth the extra complexity.

	* bignum.c (nettle_mpz_from_octets): Removed sign argument. If
	mpz_import is available, define nettle_mpz_from_octets as a macro
	calling mpz_import.
	(nettle_mpz_from_octets): Start by setting x to zero; callers no
	longer need to do that.
	(nettle_mpz_set_str_256_s): New logic for the handling of negative
	numbers. Convert in the same way as for positive numbers, and then
	subtract the appropriate power of two.

2005-10-17  Niels Mller  <nisse@lysator.liu.se>

	* bignum.c (nettle_mpz_from_octets): Improved loop. Removed the
	digit temporary (suggested by Torbjrn Granlund).

	* sparc/arcfour-crypt.asm: Improved instruction scheduling.

	* sparc/arcfour-crypt.asm: Bugfix, use lduh and stuh.

	* sparc/arcfour-crypt.asm: New file.

	* sparc64/aes.asm: Deleted unused file.

	* x86/arcfour-crypt.asm: Use ARCFOUR_I and ARCFOUR_J
	* asm.m4 (ARCFOUR): New struct.

2005-10-17  Niels Mller  <niels@s3.kth.se>

	* aes-internal.h (struct aes_table): Deleted idx and sparc_idx
	arrays.
	* aes-encrypt-table.c (_aes_encrypt_table): Likewise.
	* aes-decrypt.c (_aes_decrypt_table): Likewise.
	* asm.m4 (AES): Likewise

2005-10-16  Niels Mller  <nisse@lysator.liu.se>

	* tools/input.c (sexp_get_char): Use unsigned for the done flag.

	* sparc64/aes-encrypt-internal.asm: Include sparc/aes.m4.
	* sparc64/aes-decrypt-internal.asm: Likewise.

	* sparc64/machine.m4: Use .register pseudo op to say that we use
	%g2 and %g3 as scratch registers.

	* sparc/aes-encrypt-internal.asm: Explicitly include sparc/aes.m4.
	* sparc/aes-decrypt-internal.asm: Likewise.

	* sparc/aes.m4: New file. Moved aes-related macros here...
	* sparc/machine.m4: ... removed aes macros.

	* x86/aes-encrypt-internal.asm: Explicitly include x86/aes.m4.
	* x86/aes-decrypt-internal.asm: Likewise.

	* x86/aes.m4: New file. Moved aes-related macros here, from...
	* x86/machine.m4: ... removed aes macros.

	* sparc64/aes-encrypt-internal.asm: New file.
	* sparc64/aes-decrypt-internal.asm: New file.

	* sparc64/machine.m4: Include the same aes macros used for
	sparc32.
	(BIAS): Define magic stack bias constant.

	* sparc/aes-encrypt-internal.asm, sparc/aes-decrypt-internal.asm:
	Reduced frame size to 104 bytes, since we no longer need wtxt and
	tmp on the stack.

	* sparc/aes.asm: Deleted old aes implementation.

	* sparc/aes-decrypt-internal.asm: New file.

	* sparc/machine.m4: Don't use m4 eval, instead rely on the
	assembler's arithmetic.

	* sparc/machine.m4 (AES_FINAL_ROUND): Better scheduling, by
	interleaving independent operations.

	* sparc/machine.m4 (TMP3): A third temporary register.
	(AES_FINAL_ROUND): Prepared for scheduling.

	* sparc/machine.m4 (AES_ROUND): Deleted unused argument T. Updated
	all calls in aes-encrypt-internal.asm.

	* sparc/machine.m4 (AES_ROUND): New loop invariants T0-T3, to
	avoid the additions of the AES_TABLEx constants in the inner loop.

	* sparc/machine.m4 (AES_ROUND): Better scheduling, by
	interleaving independent operations.

	* sparc/machine.m4 (AES_ROUND): Alternate between using TMP1 and
	TMP2, to prepare for scheduling.

	* sparc/aes-encrypt-internal.asm: Renamed Ti -> Xi.

	* sparc/aes-encrypt-internal.asm: Fixed bugs. Now passes the
	testsuite.

	* sparc/machine.m4 (AES_ROUND, AES_FINAL_ROUND): Bugfixes. Put
	NOPs in the load dely slots.

	* sparc/aes-encrypt-internal.asm: Implemented. Not yet working,
	and not optimized.

	* sparc/machine.m4: Use TMP1 and TMP2, so we don't need to pass
	them as arguments.
	(AES_FINAL_ROUND): New macro.

2005-10-15  Niels Mller  <nisse@lysator.liu.se>

	* configure.ac (OBJDUMP): Substitute the program false if objdump
	is not found.

	* asm.m4 (PROLOGUE): Use TYPE_FUNCTION.

	* config.m4.in: Substitute ASM_TYPE_FUNCTION as TYPE_FUNCTION.

	* configure.ac (ASM_ELF_STYLE): Check for %function and #function,
	but not for @function.
	(ASM_TYPE_FUNCTION): New substituted variable.

	* configure.ac (ASM_ELF_STYLE): Fixed .type foo,@function statement
	used when checking for pseudo operations.

	* sparc/machine.m4 (AES_LOAD, AES_ROUND): Started writing new AES
	macros.

	* sparc/aes-encrypt-internal.asm: New file.

2005-10-14  Niels Mller  <nisse@lysator.liu.se>

	* x86/aes-decrypt.asm, x86/aes-encrypt.asm: Deleted files.

	* x86/aes-decrypt-internal.asm: New file.

	* x86/machine.m4: Changed AES macros, to handle a table register.
	Also take more of the used registers as argument.

	* x86/aes-encrypt-internal.asm: Rewritten to match new interface,
	with the table pointer as an argument. Unlike the old code, this
	should really be position independent.

	* configure.ac: When looking for assembler files, link in
	aes-encrypt-internal.asm and aes-decrypt-internal.asm. Don't look
	for aes.asm, aes-encrypt.asm and aes-decrypt.asm.

	* configure.ac (OBJDUMP): Use AC_CHECK_TOOL to check for objdump.
	(ASM_MARK_NOEXEC_STACK): Use $OBJDUMP when examining the object file.

	* Makefile.in (nettle_SOURCES): Removed aes.c,
	aes-decrypt-table.c. Added aes-decrypt-internal.c and aes-encrypt-internal.c.

	* aes.c, aes-decrypt-table.c: Deleted files.

	* aes-decrypt.c (_aes_decrypt_table): Moved table here, and made
	static.

	* aes-internal.h (_aes_decrypt_table): Don't declare, it's no
	longer globally visible.

	* aes-decrypt-internal.c (_nettle_aes_decrypt): New AES decryption
	function, analogous to _nettle_aes_encrypt.

2005-10-14  Niels Mller  <niels@s3.kth.se>

	* aes-internal.h (AES_ROUND, AES_FINAL_ROUND): New macros.

	* aes-encrypt-internal.c (_nettle_aes_encrypt): New AES encryption
	function, avoiding the table-based indexing.

	* sha1-compress.c: Added debugging code.
	* md5-compress.c: Likewise.

2005-10-13  Niels Mller  <niels@s3.kth.se>

	* config.m4.in (ASM_MARK_NOEXEC_STACK): Use a diversion, to
	substitute the value of ASM_MARK_NOEXEC_STACK at the end of each
	assembler file.

	* configure.ac (ASM_MARK_NOEXEC_STACK): Check if the C compiler
	generates a .note.GNU-stack section. If so, we should do the same
	in our assembler files.

	* sparc64/aes.asm: New file. Copy of sparc/aes.asm, with minor
	changes to the stack frame layout. Patch contributed by Henrik
	Grubbstrm. Not yet tested.

	* x86/md5-compress.asm: Skip copying of input to the stack, and
	don't allocate space for it.
	(F1): Fixed bug.

	* testsuite/md5-test.c: Document intermediate values for first
	test case.

	* configure.ac (asm_path): Check for sparc64, and use sparc64
	subdirectory. Link in md5-compress.asm, if it exists.

2005-10-13  Niels Mller  <nisse@lysator.liu.se>

	* x86/md5-compress.asm (REF): Fixed calculation of offset.

2005-10-12  Niels Mller  <nisse@lysator.liu.se>

	* x86/machine.m4 (OFFSET): Moved macro, used to be in...
	* x86/sha1-compress.asm (OFFSET): ... removed macro.

	* x86/md5-compress.asm: New file, with first attempt at md5
	assembler. Not yet working.

2005-10-11  Niels Mller  <nisse@lysator.liu.se>

	* Makefile.in (nettle_SOURCES): Added md5-compress.c.

	* md5.c: Reorganized to use _nettle_md5_compress, in analogy with
	sha1.c.

	* md5-compress.c (_nettle_md5_compress): New file and new function.

2005-10-10  Niels Mller  <niels@s3.kth.se>

	* testsuite/Makefile.in (EXTRA_SOURCES, EXTRA_TARGETS): New
	variables, for test cases that are not run by default.

	* testsuite/sha1-huge-test.c (test_main): New test case, with a
	very large sha1 input.

	* testsuite/testutils.c (test_hash_large): New function.

	* sha1.c (sha1_block): Deleted function; inlined where used.
	(SHA1_INCR): New macro for incrementing the block count.

2005-10-06  Niels Mller  <nisse@lysator.liu.se>

	* configure.ac: Bumped version to 1.14.

	* Released nettle-1.13.

	* configure.ac: Check for openssl/aes.h.

	* Makefile.in (distdir): Use a loop to pick up the contents of
	$(DISTFILES) from source and build directories. For some reason,
	$? failed to find stamp-h.in in the source directory.

2005-10-05  Niels Mller  <nisse@lysator.liu.se>

	* x86/aes-decrypt.asm: Use C_NAME(_nettle_aes_decrypt_table) when
	using the AES_SUBST_BYTE macro. Use PROLOGUE and EPILOGUE.
	* x86/sha1-compress.asm: Use PROLOGUE and EPILOGUE.
	* x86/arcfour-crypt.asm: Likewise.
	* x86/aes-encrypt.asm: Likewise.

	* config.m4.in (ELF_STYLE): Substitute configure's ASM_ELF_STYLE.

	* asm.m4 (PROLOGUE, EPILOGUE): New macros, checking the value of
	ELF_STYLE. So far, used and tested only for the x86 assembler
	files, and needed to make the assembler happy both with ELF
	(linux, solaris) and COFF (windows).

	* configure.ac (NM): Use AC_CHECK_TOOL to check for nm.
	(ASM_SYMBOL_PREFIX): Use $NM when examining the object file.
	(ASM_ELF_STYLE): New variable. Set to 'yes' if assembling a file
	with ELF-style .type and .size pseudo ops works.

	* Makefile.in (TARGETS, DISTFILES): Added nettle.pdf.
	(.texinfo.dvi, .dvi.ps, .ps.pdf): New targets, to build nettle.pdf.
	(DOCTARGETS): New variable with targets that shouldn't be deleted
	by make clean.
	(maintainer-clean-here): New target. Deletes generated
	documentation files.

	* nettle.texinfo: Define AUTHOR with accents, when running in TeX
	mode, which doesn't handle latin-1 properly. Set UPDATED-FOR to
	1.13. Updated copyright years, and introduced a COPYRIGHT-YEARS
	symbol. Updated copyright section, to mention assembler
	implementations.
	(Cipher modes): Transformed the Cipher Block Chaining to a section
	Cipher modes, describing both CBC and the new CTR mode.

	* src/nettle/x86/aes_tables.asm: Deleted unused file.

	* x86/aes.asm: Deleted contents. This file is needed just to
	override aes.c, which isn't needed for the x86 implementation.

	* configure.ac (SHLIBMINOR): Increased minor number. Library
	version is now libnettle.so.2.4, soname still libnettle.so.2.

	* examples/nettle-benchmark.c (main): Reordered hash benchmarks.

	* x86/sha1-compress.asm (EXPAND): Use % 16 instead of & 15 to
	compute offsets mod 16, since m4 on FreeBSD 49.RELEASE and NetBSD
	doesn't implement & correctly in eval.

2005-10-03  Niels Mller  <nisse@lysator.liu.se>

	* x86/sha1-compress.asm (OFFSET): New macro.
	(F3): Eliminated a movl.
	(ROUND): New argument, for k. When using F3, it's TMP3, on the
	stack, otherwise, it is kept in TMP2, a register.

2005-10-03  Niels Mller  <niels@s3.kth.se>

	* examples/nettle-openssl.c: Use correct block sizes for openssl
	ciphers.

	* examples/nettle-benchmark.c: Also display cycles per block.

2005-10-02  Niels Mller  <nisse@lysator.liu.se>

	* sha1-compress.c (_nettle_sha1_compress): Updated to new
	interface. Now responsible for byte conversion.

	* x86/sha1-compress.asm (_nettle_sha1_compress): Do byte order
	conversion, and store the input data on the stack. This leaves one
	more register free for other uses.

	* examples/nettle-benchmark.c: Now display cycles/byte, if the -f
	option is used to say what the clock frequency is.

	* sha1.c (sha1_block): Don't convert data from uint8_t to
	uint32_t, that's now the responsibility of _nettle_sha1_compress.

	* sha.h (_nettle_sha1_compress): Changed interface. Second
	argument is now a pointer to the input data in unaligned,
	big-endian form.

2005-09-28  Niels Mller  <niels@s3.kth.se>

	* sha1.c (sha1_final): Call sha1_block, don't call the compression
	function _nettle_sha1_compress directly.

	* nettle-internal.h (nettle_openssl_md5)
	(nettle_openssl_sha1): Declare.

	* examples/nettle-benchmark.c (main): Benchmark openssl md5 and
	sha1.

	* examples/nettle-openssl.c (nettle_openssl_md5)
	(nettle_openssl_sha1): Added glue for openssl hash functions.

	* nettle-internal.h (nettle_openssl_aes128, nettle_openssl_aes192)
	(nettle_openssl_aes256, nettle_openssl_arcfour128): Declare.

	* examples/nettle-benchmark.c: Check WITH_OPENSSL, not
	HAVE_LIBCRYPTO. Benchmark openssl's aes and arcfour code.

	* examples/nettle-openssl.c: Updated openssl des glue to use the
	new openssl des interface. Added glue for arcfour and aes.

2005-09-27  Niels Mller  <nisse@lysator.liu.se>

	* nettle.texinfo (RSA): Improved text about the RSA patent.
	Use @documentencoding ISO-8859-1.

2005-09-07  Niels Mller  <niels@s3.kth.se>

	* tools/sexp-conv.c (parse_options): New option --raw-hash, for
	compatibility with lsh-1.x. Equivalent to --hash.

2005-09-06  Niels Mller  <niels@s3.kth.se>

	* tools/sexp-conv.c (main): With --hash, output a newline after
	each hash.

2005-07-02  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/Makefile.in (TS_SOURCES): Added ctr-test.c.

	* testsuite/testutils.c (test_cipher_ctr): New function.

	* testsuite/ctr-test.c: New file.

	* testsuite/cbc-test.c (test_main): Use static const for msg.

	* Makefile.in (nettle_SOURCES): Added ctr.c.
	(HEADERS): Added ctr.h.
	(HEADERS): Added nettle-types.h.
	(INSTALL_HEADERS): Install nettle-stdint.h.
	(distclean-here): Delete nettle-stdint.h, not nettle-types.h.

	* ctr.c (ctr_crypt): New file, new function.

	* memxor.c (memxor3): New function, suggested by Adam Langley.

	* nettle-internal.h (NETTLE_MAX_CIPHER_BLOCK_SIZE): New constant.

	* nettle.texinfo (Cipher functions): Fixed typo in prototype for
	arctwo_encrypt (noticed by Adam Langley).

	* nettle-meta.h: No longer needs to include cbc.h.

	* cbc.h (nettle_crypt_func): Moved typedef to nettle-types.h.
	(CBC_ENCRYPT, CBC_DECRYPT): Deleted older #if:ed out versions.

	* configure.ac (AX_CREATE_STDINT_H): Use the file name
	nettle-stdint.h, not nettle-types.h.

	* nettle-types.h: New file. Automatically generated declarations
	are now in nettle-stdint.h.

2005-03-17  Niels Mller  <niels@s3.kth.se>

	* config.guess: Support Solaris on x86_64. Fix by Henrik
	Grubbstrm.

2005-01-03  Niels Mller  <niels@s3.kth.se>

	* examples/io.h: Include RSA declarations only when public key
	algorithms are enabled. Problem reported by Meilof Veeningen
	<meilof@gmail.com>.

2004-12-07  Niels Mller  <nisse@lysator.liu.se>

	* Makefile.in: Install directories, using $(INSTALL) -d, only if
	they don't exist already.

2004-12-05  Niels Mller  <nisse@lysator.liu.se>

	* config.make.in (.PRECIOUS): Reverted earlier change. We need
	.PRECIOUS to stop GNU make from deleting object files for the test
	programs.

2004-12-02  Niels Mller  <nisse@lysator.liu.se>

	* Makefile.in (.SUFFIXES): Moved from Makefile.in to...
	* config.make.in (.SUFFIXES): ... here.	This helps compilation
	with BSD make.
	* testsuite/Makefile.in (.SUFFIXES): Deleted target.

	* config.make.in (.c): Disable default rule for BSD-make.

	* Makefile.in (all check install uninstall)
	(clean distclean mostlyclean maintainer-clean): Don't use the -C
	flag when invoking make, for compatibility with Solaris make.

2004-12-02  Niels Mller  <niels@s3.kth.se>

	* Makefile.in (aesdata, desdata): Commented out the explicit
	targets.
	(shadata): Avoid using $< in non-pattern rule.

2004-12-01  Niels Mller  <nisse@lysator.liu.se>

	* config.make.in: Added a default target.

2004-11-29  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/Makefile.in: Use .$(OBJEXT). Explicitly set .SUFFIXES.

	* Makefile.in: Use .$(OBJEXT).

2004-11-28  Niels Mller  <nisse@lysator.liu.se>

	* tools/Makefile.in (nettle-lfib-stream): Avoid using $< in
	non-suffix rule.

	* Makefile.in (distdir): Handle absolute $distdir.
	Avoid using the GNU extension $^.

	* examples/Makefile.in: Avoid using the GNU extension $^.
	* tools/Makefile.in: Likewise.
	* testsuite/Makefile.in: Likewise.

2004-11-24  Niels Mller  <niels@s3.kth.se>

	* configure.ac: Fixed typo, preventing the creation of dependency
	files.

2004-11-23  Niels Mller  <nisse@lysator.liu.se>

	* Makefile.in: Use DEP_INCLUDE.
	* tools/Makefile.in: Likewise.
	* testsuite/Makefile.in: Likewise.
	* examples/Makefile.in: Likewise.

	* configure.ac (dummy-dep-files): Generate only of dependency
	tracking is enabled.

2004-11-18  Niels Mller  <nisse@lysator.liu.se>

	* Makefile.in (clean-here): The clean target should not delete the
	dependency files. Moved to the distclean target.
	* examples/Makefile.in: Likewise.
	* testsuite/Makefile.in: Likewise.
	* tools/Makefile.in: Likewise.

	* configure.ac (ASM_SYMBOL_PREFIX): Fixed test.
	(dummy-dep-files): Added quotes to sed command.

2004-11-17  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/symbols-test: Try plain nm if nm -g doesn't work.

	* x86/sha1-compress.asm: Use C_NAME for global symbols.
	* x86/aes-encrypt.asm: Likewise.
	* x86/aes-decrypt.asm: Likewise.
	* x86/arcfour-crypt.asm: Likewise.

	* Makefile.in (config.m4): New rule.

	* config.m4.in (C_NAME): New macro.

	* configure.ac (ASM_SYMBOL_PREFIX): Check if global symbols have a
	leading underscore.

2004-11-16  Niels Mller  <nisse@lysator.liu.se>

	* Deleted getopt.c, getopt.h and getopt1.c from the CVS tree. Link
	them from shared copies in lsh/misc instead.

2004-11-14  Niels Mller  <nisse@lysator.liu.se>

	* Makefile.in (DEP_FILES): Try include with only one macro
	argument to be expanted.

	* configure.ac (dummy-dep-files): Create dummy dependency files,
	so that they can be included by the makefiles.

2004-11-13  Niels Mller  <nisse@lysator.liu.se>

	* Makefile.in: Don't use -include, as it's GNU make specific.
	* examples/Makefile.in, tools/Makefile.in, testsuite/Makefile.in:
	Likewise.

	* examples/nettle-openssl.c: Check WITH_OPENSSL, not HAVE_LIBCRYPTO.

	* configure.ac: Check for individual openssl headers blowfish.h,
	cast.h, des.h. Renamed symbol HAVE_LIBCRYPTO to WITH_OPENSSL. New
	configure option --disable-openssl.

2004-11-04  Niels Mller  <nisse@lysator.liu.se>

	* configure.ac: Bumped version to 1.13.

	* Released nettle-1.12.

2004-11-04  Niels Mller  <niels@s3.kth.se>

	* nettle.texinfo (UPDATED-FOR): Bumped to 1.12.

2004-11-02  Niels Mller  <nisse@lysator.liu.se>

	* nettle.texinfo (Cipher functions): Updated AES documentation,
	for aes_set_encrypt_key and aes_set_decrypt_key.
	(UPDATED-FOR): Set to 1.11. I think the manual should be updated
	with all user-visible changes.

	* aclocal.m4 (LSH_DEPENDENCY_TRACKING): Need extra quoting in case
	pattern. (This file really lives in the lsh tree, as
	lsh/acinclude.m4. For a complete ChangeLog, see lsh/Changelog).

2004-10-26  Niels Mller  <nisse@lysator.liu.se>

	* configure.ac: Bumped version to 1.12.

	* Released nettle-1.11.

	* Makefile.in (clean-here): Delete *.s files.
	(PRE_CPPFLAGS): Use this variable, not INCLUDES. Removed
	-I$(srcdir).

	* x86/arcfour-crypt.asm: Use movzbl when extending %cl to 32 bits.

2004-10-24  Niels Mller  <nisse@lysator.liu.se>

	* x86/arcfour-crypt.asm: Reverted the latest two changes; update
	bost src and dst pointers in the loop, and use plain addb when
	updating j. These two previous changes slowed the code down on AMD
	Duron.

2004-10-21  Niels Mller  <nisse@lysator.liu.se>

	* Makefile.in (install-shared): Use $(INSTALL_PROGRAM).

	* configure.ac (SHLIBMINOR): Updated, shared library version is
	now libnettle.so.2.3, soname still libnettle.so.2.

	* Makefile.in (DISTFILES): Added asm.m4.

2004-10-21  Niels Mller  <niels@s3.kth.se>

	* examples/Makefile.in: Deleted all configure-related rules,
	except the one rebuilding this Makefile. One should run make at
	top level if other configure related files change.
	* tools/Makefile.in: Likewise.
	* testsuite/Makefile.in: Likewise.

	* configure.ac: Replaced AC_OUTPUT(list...) with an AC_OUTPUT
	without arguments, and AC_CONFIG_FILES listing the files.

	* Makefile.in: Changed the assembler rules as suffix rules.
	Rewrote the configure-related rules, mostly based on the example
	in the autoconf manual.

2004-10-20  Niels Mller  <nisse@lysator.liu.se>

	* examples/nettle-openssl.c (NCOMPAT): Disable openssl backwards
	compatibility.

	* config.make.in: Insert $(PRE_CPPFLAGS) and $(PRE_LDFLAGS) before
	$(CPPFLAGS) and $(LDFLAGS). This mechanism replaces $(INCLUDES).

	* examples/Makefile.in (PRE_CPPFLAGS, PRE_LDFLAGS): Use these
	flags to get -I.. and -L.. early on the command line.
	* testsuite/Makefile.in: Likewise
	* tools/Makefile.in: Likewise.

2004-10-20  Niels Mller  <niels@s3.kth.se>

	* Makefile.in: In the assembler rules, there's no need to look in
	$(srcdir) for the input file.

	* x86/arcfour-crypt.asm: Reduced inner loop by one instruction, by
	precomputing the offset between src and dst.

	* tools/Makefile.in (.c.$(OBJEXT)): Removed redundant -I.. flag.

	* x86/arcfour-crypt.asm (nettle_arcfour_crypt): Replaced addb ->
	addl + andl $0xff, improving speed on PPro by another 15%.

2004-10-20  Niels Mller  <nisse@lysator.liu.se>

	* tools/Makefile.in (install): Support DESTDIR.
	(uninstall): New target.

	* testsuite/Makefile.in (uninstall): New dummy target.

	* config.sub: Copied from automake-1.8.5.

	* examples/Makefile.in (SOURCES): Added rsa-sign.c and rsa-verify.c.
	(DISTFILES): Added getopt.h.
	(install uninstall): New dummy targets.

	* config.make.in (.PHONY): Added more targets.

	* Makefile.in (.texinfo.info, .texinfo.html): New targets. Added
	support for uninstall and DESTDIR. Various fixes to install and
	distcheck.

	* examples/Makefile.in (INCLUDES): Added -I flags.
	(distdir): Use $^ to refer to the files.
	(distclean): New target.
	* testsuite/Makefile.in: Likewise.
	* tools/Makefile.in: Likewise.

	* Makefile.in (INCLUDES): Need -I flags for VPATH build.
	(clean distclean mostlyclean maintainer-clean): Clean
	subdirectories first.
	(DISTFILES): Added a bunch of files.
	(des_headers): Added desCore rules.
	(install-here): Split off target install-headers, which uses $^ to
	refer to the files.
	(distdir): Use $^ to refer to the files.
	distcheck): Fixes.

	* config.make.in (COMPILE): Add $(INCLUDE) to the line.

2004-10-19  Niels Mller  <nisse@lysator.liu.se>

	Stop using automake. Replaced each Makefile.am with a hand-written
	Makefile.in.
	* configure.ac: New output variable CCPIC_MAYBE. New output file
	config.make. Replaced automake constructions.
	* .bootstrap: Don't run aclocal and automake.
	* config.make.in: New file, with shared Makefile variables and rules.

2004-10-18  Niels Mller  <nisse@lysator.liu.se>

	* x86/arcfour-crypt.asm (nettle_arcfour_crypt): Replace incb ->
	incl + andl, to improve speed on PPro and PII. Suggested by
	Fredrik Olsson.

2004-10-08  Niels Mller  <niels@s3.kth.se>

	* examples/rsa-encrypt-test: Avoid reading and executing a file at
	the same time.
	* examples/setup-env: Likewise.

2004-10-06  Niels Mller  <niels@s3.kth.se>

	* testsuite/symbols-test: Ignore __i686.get_pc_thunk.bx and
	similar symbols.

2004-10-05  Niels Mller  <nisse@lysator.liu.se>

	* twofish.c (q_table): Use a const pointer array.

	* sexp2dsa.c (dsa_keypair_from_sexp_alist): Use a const pointer
	array for the keywords.
	(dsa_signature_from_sexp): Likewise.
	* sexp2rsa.c (rsa_keypair_from_sexp_alist): Likewise.
	(rsa_keypair_from_sexp): Likewise.

	* sexp.c (sexp_iterator_check_types): Use an argument of type
	"const uint8_t * const *" for the types list.
	(sexp_iterator_assoc): Likewise, for the keys list.

	* list-obj-sizes.awk: Fixes to handle multiple .data and .rodata
	sections. Also fixed to handle the last file correctly.

2004-09-23  Niels Mller  <nisse@lysator.liu.se>

	* configure.ac (SHLIBLINK, SHLIBLIBS): On cygwin, linking needs
	-Wl,--whole-archive $(OBJECTS) -Wl,--no-whole-archive $(LIBS).

2004-09-22  Niels Mller  <niels@s3.kth.se>

	* configure.ac: Setup SHLIBFORLINK and friends for cygwin.

	* list-obj-sizes.awk: Strip *_a-prefix from all file names.

	* Makefile.am (libnettle_a_SOURCES): List only .c files. Headers
	moved to noinst_HEADERS.
	(SHLIBOBJECTS): Substitute from libnettle_a_SOURCES, not
	am_libnettle_a_OBJECTS, since the latter includes
	libnettle_a-prefixes with some automake versions.
	(SHLIBSONAME): Check if this name is empty, which is the case on
	cygwin, before using it.

2004-08-31  Niels Mller  <nisse@lysator.liu.se>

	* configure.ac: New command line option --disable-pic. Use
	LSH_CCPIC.

	* Makefile.am (libnettle_a_CFLAGS): Added $(CCPIC), to attempt to
	build also the static library as position independent code.

2004-08-24  Niels Mller  <nisse@lysator.liu.se>

	* des-compat.c (des_cbc_cksum): Pad input with NUL's, if it's not
	an integral number of blocks.

2004-08-24  Niels Mller  <niels@s3.kth.se>

	* testsuite/arctwo-test.c, arctwo.h, arctwo.c
	(arctwo_set_key_ekb): Fixed typo; it should be "ekb", not "ebk".

	Integrated arctwo patch from Simon Josefsson.
	* testsuite/Makefile.am (noinst_PROGRAMS): Added arctwo-test.

	* Makefile.am (libnettleinclude_HEADERS): Added arctwo.h.
	(libnettle_a_SOURCES): Added arctwo.c, arctwo.h and arctwo-meta.c.

	* nettle-meta.h (nettle_arctwo40, nettle_arctwo64)
	(nettle_arctwo64, nettle_arctwo_gutmann128): Declare ciphers.

	* arctwo-meta.c, arctwo.c, arctwo.h, testsuite/arctwo-test.c: New
	files.

	* macros.h (LE_READ_UINT16, LE_WRITE_UINT16): New macros.

2004-08-23  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/md5-test.c (test_main): Added collision, found in 2004.
	(test_main): Added second collision.

2004-08-23  Niels Mller  <niels@s3.kth.se>

	* testsuite/md5-test.c (test_main): Added first half of a
	collision test case.

	* des-compat.c (des_cbc_cksum): Changed input argument to be of
	type const uint8_t * (was const des_cblock *).

	* des-compat.h (const_des_cblock): New bogus type. Disabled use of
	const, for compatibility with openssl.

2004-06-08  Niels Mller  <niels@s3.kth.se>

	* aesdata.c: Renamed log and ilog to gf2_log and gf2_exp.

2004-04-07  Niels Mller  <nisse@lysator.liu.se>

	* aes-set-encrypt-key.c (log, ilog): Deleted unused tables.

	* aes-set-decrypt-key.c (gf2_log, gf2_exp, mult): Renamed tables,
	were log and ilog.

2004-03-20  Niels Mller  <nisse@lysator.liu.se>

	* configure.ac: Use AC_CONFIG_AUX_DIR([.]).

2004-03-18  Niels Mller  <niels@s3.kth.se>

	* examples/io.c (read_file): Display a message if fopen fails.

2004-03-05  Niels Mller  <nisse@lysator.liu.se>

	* Released nettle-1.10.

	* configure.ac (SHLIBMINOR): Shared library version is now 2.2.

2004-03-04  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/symbols-test: Pass -g flag to nm.

2004-03-02  Niels Mller  <nisse@lysator.liu.se>

	* configure.ac: Fixed EXEEXT workaround.

2004-03-02  Niels Mller  <niels@s3.kth.se>

	* configure.ac: Added workaround to get the correct $(EXEEXT)=''
	when compiling with rntcl.

2004-03-02  Niels Mller  <nisse@lysator.liu.se>

	* testsuite/Makefile.am (noinst_PROGRAMS): Put test program list
	here, to let automake add $(EXEEXT).

	* configure.ac (RSA_EXAMPLES): Append $(EXEEXT) to the filenames.

2004-03-01  Niels Mller  <nisse@lysator.liu.se>

	* examples/rsa-keygen.c, examples/rsa-encrypt.c,
	examples/rsa-decrypt.c: Include "getopt.h" instead of <unistd.h>.

	* examples/Makefile.am (rsa_encrypt_SOURCES, rsa_decrypt_SOURCES)
	(rsa_keygen_SOURCES): Added getopt.h, getopt.c and getopt1.c.

	* examples/getopt.h, examples/getopt.c, examples/getopt1.c: New
	files.