nettle.texinfo

\input texinfo          @c -*-texinfo-*-
@c %**start of header
@setfilename nettle.info
@settitle Nettle: a low-level cryptographic library
@documentencoding UTF-8
@footnotestyle separate
@syncodeindex fn cp
@c %**end of header

@set UPDATED-FOR 2.5
@set AUTHOR Niels Möller

@copying
This manual is for the Nettle library (version @value{UPDATED-FOR}), a
low-level cryptographic library.

Originally written 2001 by @value{AUTHOR}, updated 2011.

@quotation
This manual is placed in the public domain. You may freely copy it, in
whole or in part, with or without modification. Attribution is
appreciated, but not required.
@end quotation
@end copying

@titlepage
@title Nettle Manual
@subtitle For the Nettle Library version @value{UPDATED-FOR}
@author @value{AUTHOR}
@page
@vskip 0pt plus 1filll
@insertcopying
@end titlepage

@dircategory Encryption
@direntry
* Nettle: (nettle).             A low-level cryptographic library.
@end direntry

@contents

@ifnottex
@node     Top, Introduction, (dir), (dir)
@comment  node-name,  next,  previous,  up
@top Nettle

This document describes the Nettle low-level cryptographic library. You
can use the library directly from your C programs, or write or use an
object-oriented wrapper for your favorite language or application.

@insertcopying

@menu
* Introduction::                What is Nettle?
* Copyright::                   Your rights.
* Conventions::                 General interface conventions.
* Example::                     An example program.
* Linking::                     Linking with the libnettle and libhogweed.
* Reference::                   All Nettle functions and features.
* Nettle soup::                 For the serious nettle hacker.
* Installation::                How to install Nettle.
* Index::                       Function and concept index.

@detailmenu
 --- The Detailed Node Listing ---

Reference

* Hash functions::              
* Cipher functions::            
* Cipher modes::                
* Keyed hash functions::        
* Public-key algorithms::       
* Randomness::                  
* Ascii encoding::              
* Miscellaneous functions::     
* Compatibility functions::     

Cipher modes

* CBC::                         
* CTR::                         
* GCM::                         

Public-key algorithms

* RSA::                         The RSA public key algorithm.
* DSA::                         The DSA digital signature algorithm.

@end detailmenu
@end menu

@end ifnottex

@node Introduction, Copyright, Top, Top
@comment  node-name,  next,  previous,  up
@chapter Introduction

Nettle is a cryptographic library that is designed to fit easily in more
or less any context: In crypto toolkits for object-oriented languages
(C++, Python, Pike, ...), in applications like LSH or GNUPG, or even in
kernel space. In most contexts, you need more than the basic
cryptographic algorithms, you also need some way to keep track of available
algorithms, their properties and variants. You often have some algorithm
selection process, often dictated by a protocol you want to implement.

And as the requirements of applications differ in subtle and not so
subtle ways, an API that fits one application well can be a pain to use
in a different context. And that is why there are so many different
cryptographic libraries around.

Nettle tries to avoid this problem by doing one thing, the low-level
crypto stuff, and providing a @emph{simple} but general interface to it.
In particular, Nettle doesn't do algorithm selection. It doesn't do
memory allocation. It doesn't do any I/O.

The idea is that one can build several application and context specific
interfaces on top of Nettle, and share the code, test cases, benchmarks,
documentation, etc. Examples are the Nettle module for the Pike
language, and LSH, which both use an object-oriented abstraction on top
of the library.

This manual explains how to use the Nettle library. It also tries to
provide some background on the cryptography, and advice on how to best
put it to use.

@node Copyright, Conventions, Introduction, Top
@comment  node-name,  next,  previous,  up
@chapter Copyright

Nettle is distributed under the GNU Lesser General Public License
(LGPL), see the file COPYING.LIB for details. A few of the individual
files are in the public domain. To find the current status of particular
files, you have to read the copyright notices at the top of the files.

This manual is in the public domain. You may freely copy it in whole or
in part, e.g., into documentation of programs that build on Nettle.
Attribution, as well as contribution of improvements to the text, is of
course appreciated, but it is not required.

A list of the supported algorithms, their origins and licenses:

@table @emph
@item AES
The implementation of the AES cipher (also known as rijndael) is written
by Rafael Sevilla. Assembler for x86 by Rafael Sevilla and
@value{AUTHOR}, Sparc assembler by @value{AUTHOR}. Released under the
LGPL.

@item ARCFOUR
The implementation of the ARCFOUR (also known as RC4) cipher is written
by @value{AUTHOR}. Released under the LGPL.

@item ARCTWO
The implementation of the ARCTWO (also known as RC2) cipher is written
by Nikos Mavroyanopoulos and modified by Werner Koch and Simon
Josefsson. Released under the LGPL.

@item BLOWFISH
The implementation of the BLOWFISH cipher is written by Werner Koch,
copyright owned by the Free Software Foundation. Also hacked by Simon
Josefsson and Niels Möller. Released under the LGPL.

@item CAMELLIA
The C implementation is by Nippon Telegraph and Telephone Corporation
(NTT), heavily modified by @value{AUTHOR}. Assembler for x86 and x86_64
by @value{AUTHOR}. Released under the LGPL.

@item CAST128
The implementation of the CAST128 cipher is written by Steve Reid.
Released into the public domain.

@item DES
The implementation of the DES cipher is written by Dana L. How, and
released under the LGPL.

@item MD2
The implementation of MD2 is written by Andrew Kuchling, and hacked
some by Andreas Sigfridsson and @value{AUTHOR}. Python Cryptography
Toolkit license (essentially public domain).

@item MD4
This is almost the same code as for MD5 below, with modifications by
Marcus Comstedt. Released into the public domain.

@item MD5
The implementation of the MD5 message digest is written by Colin Plumb.
It has been hacked some more by Andrew Kuchling and @value{AUTHOR}.
Released into the public domain.

@item RIPMED160
The implementation of RIPEMD160 message digest is based on the code in
libgcrypt, copyright owned by the Free Software Foundation. Ported to
Nettle by Andres Mejia. Released under the LGPL.

@item SALSA20
The C implementation of SALSA20 is based on D. J. Bernstein's reference
implementation (in the public domain), adapted to Nettle by Simon
Josefsson, and heavily modified by Niels Möller. Assembly for x86_64 by
Niels Möller. Released under the LGPL.

@item SERPENT
The implementation of the SERPENT cipher is based on the code in libgcrypt,
copyright owned by the Free Software Foundation. Adapted to Nettle by
Simon Josefsson and heavily modified by Niels Möller. Assembly for
x86_64 by Niels Möller. Released under the LGPL.

@item SHA1
The C implementation of the SHA1 message digest is written by Peter
Gutmann, and hacked some more by Andrew Kuchling and @value{AUTHOR}.
Released into the public domain. Assembler for x86 by @value{AUTHOR},
released under the LGPL.

@item SHA224, SHA256, SHA384, and SHA512
Written by @value{AUTHOR}, using Peter Gutmann's SHA1 code as a model. 
Released under the LGPL.

@item TWOFISH
The implementation of the TWOFISH cipher is written by Ruud de Rooij.
Released under the LGPL.

@item RSA
Written by @value{AUTHOR}, released under the LGPL. Uses the GMP library
for bignum operations.

@item DSA
Written by @value{AUTHOR}, released under the LGPL. Uses the GMP library
for bignum operations.
@end table

@node Conventions, Example, Copyright, Top
@comment  node-name,  next,  previous,  up
@chapter Conventions

For each supported algorithm, there is an include file that defines a
@emph{context struct}, a few constants, and declares functions for
operating on the context. The context struct encapsulates all information
needed by the algorithm, and it can be copied or moved in memory with no
unexpected effects.

For consistency, functions for different algorithms are very similar,
but there are some differences, for instance reflecting if the key setup
or encryption function differ for encryption and decryption, and whether
or not key setup can fail. There are also differences between algorithms
that don't show in function prototypes, but which the application must
nevertheless be aware of. There is no big difference between the
functions for stream ciphers and for block ciphers, although they should
be used quite differently by the application.

If your application uses more than one algorithm of the same type, you
should probably create an interface that is tailor-made for your needs,
and then write a few lines of glue code on top of Nettle.

By convention, for an algorithm named @code{foo}, the struct tag for the
context struct is @code{foo_ctx}, constants and functions uses prefixes
like @code{FOO_BLOCK_SIZE} (a constant) and @code{foo_set_key} (a
function).

In all functions, strings are represented with an explicit length, of
type @code{unsigned}, and a pointer of type @code{uint8_t *} or
@code{const uint8_t *}. For functions that transform one string to
another, the argument order is length, destination pointer and source
pointer. Source and destination areas are of the same length. Source and
destination may be the same, so that you can process strings in place,
but they @emph{must not} overlap in any other way.

Many of the functions lack return value and can never fail. Those
functions which can fail, return one on success and zero on failure.

@c FIXME: Say something about the name mangling.

@node Example, Linking, Conventions, Top
@comment  node-name,  next,  previous,  up
@chapter Example

A simple example program that reads a file from standard input and
writes its SHA1 checksum on standard output should give the flavor of
Nettle.

@example
@verbatiminclude sha-example.c
@end example

On a typical Unix system, this program can be compiled and linked with
the command line 
@example
cc sha-example.c -o sha-example -lnettle
@end example

@node Linking, Reference, Example, Top
@comment  node-name,  next,  previous,  up
@chapter Linking

Nettle actually consists of two libraries, @file{libnettle} and
@file{libhogweed}. The @file{libhogweed} library contains those
functions of Nettle that uses bignum operations, and depends on the GMP
library. With this division, linking works the same for both static and
dynamic libraries.

If an application uses only the symmetric crypto algorithms of Nettle
(i.e., block ciphers, hash functions, and the like), it's sufficient to
link with @code{-lnettle}. If an application also uses public-key
algorithms, the recommended linker flags are @code{-lhogweed -lnettle
-lgmp}. If the involved libraries are installed as dynamic libraries, it
may be sufficient to link with just @code{-lhogweed}, and the loader
will resolve the dependencies automatically.

@node Reference, Nettle soup, Linking, Top
@comment  node-name,  next,  previous,  up
@chapter Reference

This chapter describes all the Nettle functions, grouped by family.

@menu
* Hash functions::              
* Cipher functions::            
* Cipher modes::                
* Keyed hash functions::        
* Public-key algorithms::       
* Randomness::                  
* Ascii encoding::              
* Miscellaneous functions::     
* Compatibility functions::     
@end menu

@node Hash functions, Cipher functions, Reference, Reference
@comment  node-name,  next,  previous,  up
@section Hash functions
@cindex Hash function
A cryptographic @dfn{hash function} is a function that takes variable
size strings, and maps them to strings of fixed, short, length. There
are naturally lots of collisions, as there are more possible 1MB files
than 20 byte strings. But the function is constructed such that is hard
to find the collisions. More precisely, a cryptographic hash function
@code{H} should have the following properties:

@table @emph

@item One-way
@cindex One-way
Given a hash value @code{H(x)} it is hard to find a string @code{x}
that hashes to that value.

@item Collision-resistant
@cindex Collision-resistant
It is hard to find two different strings, @code{x} and @code{y}, such
that @code{H(x)} = @code{H(y)}.

@end table

Hash functions are useful as building blocks for digital signatures,
message authentication codes, pseudo random generators, association of
unique ids to documents, and many other things.

The most commonly used hash functions are MD5 and SHA1. Unfortunately,
both these fail the collision-resistance requirement; cryptologists have
found ways to construct colliding inputs. The recommended hash function
for new applications is SHA256, even though it uses a structure similar
to MD5 and SHA1. Constructing better hash functions is an urgent research
problem.

@subsection @acronym{MD5}

MD5 is a message digest function constructed by Ronald Rivest, and
described in @cite{RFC 1321}. It outputs message digests of 128 bits, or
16 octets. Nettle defines MD5 in @file{<nettle/md5.h>}.

@deftp {Context struct} {struct md5_ctx}
@end deftp

@defvr Constant MD5_DIGEST_SIZE
The size of an MD5 digest, i.e. 16.
@end defvr

@defvr Constant MD5_DATA_SIZE
The internal block size of MD5. Useful for some special constructions,
in particular HMAC-MD5.
@end defvr

@deftypefun void md5_init (struct md5_ctx *@var{ctx})
Initialize the MD5 state.
@end deftypefun

@deftypefun void md5_update (struct md5_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void md5_digest (struct md5_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{MD5_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context in the same way as
@code{md5_init}.
@end deftypefun

The normal way to use MD5 is to call the functions in order: First
@code{md5_init}, then @code{md5_update} zero or more times, and finally
@code{md5_digest}. After @code{md5_digest}, the context is reset to
its initial state, so you can start over calling @code{md5_update} to
hash new data.

To start over, you can call @code{md5_init} at any time.

@subsection @acronym{MD2}

MD2 is another hash function of Ronald Rivest's, described in
@cite{RFC 1319}. It outputs message digests of 128 bits, or 16 octets.
Nettle defines MD2 in @file{<nettle/md2.h>}.

@deftp {Context struct} {struct md2_ctx}
@end deftp

@defvr Constant MD2_DIGEST_SIZE
The size of an MD2 digest, i.e. 16.
@end defvr

@defvr Constant MD2_DATA_SIZE
The internal block size of MD2.
@end defvr

@deftypefun void md2_init (struct md2_ctx *@var{ctx})
Initialize the MD2 state.
@end deftypefun

@deftypefun void md2_update (struct md2_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void md2_digest (struct md2_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{MD2_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context in the same way as
@code{md2_init}.
@end deftypefun

@subsection @acronym{MD4}

MD4 is a predecessor of MD5, described in @cite{RFC 1320}. Like MD5, it
is constructed by Ronald Rivest. It outputs message digests of 128 bits,
or 16 octets. Nettle defines MD4 in @file{<nettle/md4.h>}. Use of MD4 is
not recommended, but it is sometimes needed for compatibility with
existing applications and protocols.

@deftp {Context struct} {struct md4_ctx}
@end deftp

@defvr Constant MD4_DIGEST_SIZE
The size of an MD4 digest, i.e. 16.
@end defvr

@defvr Constant MD4_DATA_SIZE
The internal block size of MD4.
@end defvr

@deftypefun void md4_init (struct md4_ctx *@var{ctx})
Initialize the MD4 state.
@end deftypefun

@deftypefun void md4_update (struct md4_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void md4_digest (struct md4_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{MD4_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context in the same way as
@code{md4_init}.
@end deftypefun

@subsection @acronym{RIPEMD160}

RIPEMD160 is a hash function designed by Hans Dobbertin, Antoon
Bosselaers, and Bart Preneel, as a strengthened version of RIPEMD
(which, like MD4 and MD5, fails the collision-resistance requirement).
It produces message digests of 160 bits, or 20 octets. Nettle defined
RIPEMD160 in @file{nettle/ripemd160.h}.

@deftp {Context struct} {struct ripemd160_ctx}
@end deftp

@defvr Constant RIPEMD160_DIGEST_SIZE
The size of an RIPEMD160 digest, i.e. 20.
@end defvr

@defvr Constant RIPEMD160_DATA_SIZE
The internal block size of RIPEMD160.
@end defvr

@deftypefun void ripemd160_init (struct ripemd160_ctx *@var{ctx})
Initialize the RIPEMD160 state.
@end deftypefun

@deftypefun void ripemd160_update (struct ripemd160_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void ripemd160_digest (struct ripemd160_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{RIPEMD160_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context in the same way as
@code{ripemd160_init}.
@end deftypefun

@subsection @acronym{SHA1}

SHA1 is a hash function specified by @dfn{NIST} (The U.S. National Institute
for Standards and Technology). It outputs hash values of 160 bits, or 20
octets. Nettle defines SHA1 in @file{<nettle/sha.h>}.

The functions are analogous to the MD5 ones.

@deftp {Context struct} {struct sha1_ctx}
@end deftp

@defvr Constant SHA1_DIGEST_SIZE
The size of an SHA1 digest, i.e. 20.
@end defvr

@defvr Constant SHA1_DATA_SIZE
The internal block size of SHA1. Useful for some special constructions,
in particular HMAC-SHA1.
@end defvr

@deftypefun void sha1_init (struct sha1_ctx *@var{ctx})
Initialize the SHA1 state.
@end deftypefun

@deftypefun void sha1_update (struct sha1_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void sha1_digest (struct sha1_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{SHA1_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context in the same way as
@code{sha1_init}.
@end deftypefun

@subsection @acronym{SHA256}

SHA256 is another hash function specified by @dfn{NIST}, intended as a
replacement for @acronym{SHA1}, generating larger digests. It outputs
hash values of 256 bits, or 32 octets. Nettle defines SHA256 in
@file{<nettle/sha.h>}.

The functions are analogous to the MD5 ones.

@deftp {Context struct} {struct sha256_ctx}
@end deftp

@defvr Constant SHA256_DIGEST_SIZE
The size of an SHA256 digest, i.e. 32.
@end defvr

@defvr Constant SHA256_DATA_SIZE
The internal block size of SHA256. Useful for some special constructions,
in particular HMAC-SHA256.
@end defvr

@deftypefun void sha256_init (struct sha256_ctx *@var{ctx})
Initialize the SHA256 state.
@end deftypefun

@deftypefun void sha256_update (struct sha256_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void sha256_digest (struct sha256_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{SHA256_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context in the same way as
@code{sha256_init}.
@end deftypefun

@subsection @acronym{SHA224}

SHA224 is a variant of SHA256, with a different initial state, and with
the output truncated to 224 bits, or 28 octets. Nettle defines SHA224 in
@file{<nettle/sha.h>}.

The functions are analogous to the MD5 ones.

@deftp {Context struct} {struct sha224_ctx}
@end deftp

@defvr Constant SHA224_DIGEST_SIZE
The size of an SHA224 digest, i.e. 28.
@end defvr

@defvr Constant SHA224_DATA_SIZE
The internal block size of SHA224. Useful for some special constructions,
in particular HMAC-SHA224.
@end defvr

@deftypefun void sha224_init (struct sha224_ctx *@var{ctx})
Initialize the SHA224 state.
@end deftypefun

@deftypefun void sha224_update (struct sha224_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void sha224_digest (struct sha224_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{SHA224_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context in the same way as
@code{sha224_init}.
@end deftypefun

@subsection @acronym{SHA512}

SHA512 is a larger sibling to SHA256, with a very similar structure but
with both the output and the internal variables of twice the size. The
internal variables are 64 bits rather than 32, making it significantly
slower on 32-bit computers. It outputs hash values of 512 bits, or 64
octets. Nettle defines SHA512 in @file{<nettle/sha.h>}.

The functions are analogous to the MD5 ones.

@deftp {Context struct} {struct sha512_ctx}
@end deftp

@defvr Constant SHA512_DIGEST_SIZE
The size of an SHA512 digest, i.e. 64.
@end defvr

@defvr Constant SHA512_DATA_SIZE
The internal block size of SHA512. Useful for some special constructions,
in particular HMAC-SHA512.
@end defvr

@deftypefun void sha512_init (struct sha512_ctx *@var{ctx})
Initialize the SHA512 state.
@end deftypefun

@deftypefun void sha512_update (struct sha512_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void sha512_digest (struct sha512_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{SHA512_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context in the same way as
@code{sha512_init}.
@end deftypefun

@subsection @acronym{SHA384}

SHA384 is a variant of SHA512, with a different initial state, and with
the output truncated to 384 bits, or 48 octets. Nettle defines SHA384 in
@file{<nettle/sha.h>}.

The functions are analogous to the MD5 ones.

@deftp {Context struct} {struct sha384_ctx}
@end deftp

@defvr Constant SHA384_DIGEST_SIZE
The size of an SHA384 digest, i.e. 48.
@end defvr

@defvr Constant SHA384_DATA_SIZE
The internal block size of SHA384. Useful for some special constructions,
in particular HMAC-SHA384.
@end defvr

@deftypefun void sha384_init (struct sha384_ctx *@var{ctx})
Initialize the SHA384 state.
@end deftypefun

@deftypefun void sha384_update (struct sha384_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void sha384_digest (struct sha384_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{SHA384_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context in the same way as
@code{sha384_init}.
@end deftypefun

@subsection @code{struct nettle_hash}

Nettle includes a struct including information about the supported hash
functions. It is defined in @file{<nettle/nettle-meta.h>}, and is used
by Nettle's implementation of @acronym{HMAC} (@pxref{Keyed hash
functions}).

@deftp {Meta struct} @code{struct nettle_hash} name context_size digest_size block_size init update digest
The last three attributes are function pointers, of types
@code{nettle_hash_init_func}, @code{nettle_hash_update_func}, and
@code{nettle_hash_digest_func}. The first argument to these functions is
@code{void *} pointer to a context struct, which is of size
@code{context_size}. 
@end deftp

@deftypevr {Constant Struct} {struct nettle_hash} nettle_md2
@deftypevrx {Constant Struct} {struct nettle_hash} nettle_md4
@deftypevrx {Constant Struct} {struct nettle_hash} nettle_md5
@deftypevrx {Constant Struct} {struct nettle_hash} nettle_ripemd160
@deftypevrx {Constant Struct} {struct nettle_hash} nettle_sha1
@deftypevrx {Constant Struct} {struct nettle_hash} nettle_sha224
@deftypevrx {Constant Struct} {struct nettle_hash} nettle_sha256
@deftypevrx {Constant Struct} {struct nettle_hash} nettle_sha384
@deftypevrx {Constant Struct} {struct nettle_hash} nettle_sha512

These are all the hash functions that Nettle implements.

Nettle also exports a list of all these hashes.  This list can be used
to dynamically enumerate or search the supported algorithms:

@deftypevrx {Constant Struct} {struct nettle_hash **} nettle_hashes

@end deftypevr

@node Cipher functions, Cipher modes, Hash functions, Reference
@comment  node-name,  next,  previous,  up
@section Cipher functions
@cindex Cipher

A @dfn{cipher} is a function that takes a message or @dfn{plaintext}
and a secret @dfn{key} and transforms it to a @dfn{ciphertext}. Given
only the ciphertext, but not the key, it should be hard to find the
plaintext. Given matching pairs of plaintext and ciphertext, it should
be hard to find the key.

@cindex Block Cipher
@cindex Stream Cipher

There are two main classes of ciphers: Block ciphers and stream ciphers.

A block cipher can process data only in fixed size chunks, called
@dfn{blocks}. Typical block sizes are 8 or 16 octets. To encrypt
arbitrary messages, you usually have to pad it to an integral number of
blocks, split it into blocks, and then process each block. The simplest
way is to process one block at a time, independent of each other. That
mode of operation is called @dfn{ECB}, Electronic Code Book mode.
However, using @acronym{ECB} is usually a bad idea. For a start, plaintext blocks
that are equal are transformed to ciphertext blocks that are equal; that
leaks information about the plaintext. Usually you should apply the
cipher is some ``feedback mode'', @dfn{CBC} (Cipher Block Chaining) and
@dfn{CTR} (Counter mode) being two of
of the most popular. See @xref{Cipher modes}, for information on
how to apply @acronym{CBC} and @acronym{CTR} with Nettle.

A stream cipher can be used for messages of arbitrary length. A typical
stream cipher is a keyed pseudo-random generator. To encrypt a plaintext
message of @var{n} octets, you key the generator, generate @var{n}
octets of pseudo-random data, and XOR it with the plaintext. To decrypt,
regenerate the same stream using the key, XOR it to the ciphertext, and
the plaintext is recovered.

@strong{Caution:} The first rule for this kind of cipher is the
same as for a One Time Pad: @emph{never} ever use the same key twice.

A common misconception is that encryption, by itself, implies
authentication. Say that you and a friend share a secret key, and you
receive an encrypted message. You apply the key, and get a plaintext
message that makes sense to you. Can you then be sure that it really was
your friend that wrote the message you're reading? The answer is no. For
example, if you were using a block cipher in ECB mode, an attacker may
pick up the message on its way, and reorder, delete or repeat some of
the blocks. Even if the attacker can't decrypt the message, he can
change it so that you are not reading the same message as your friend
wrote. If you are using a block cipher in @acronym{CBC} mode rather than
ECB, or are using a stream cipher, the possibilities for this sort of
attack are different, but the attacker can still make predictable
changes to the message.

It is recommended to @emph{always} use an authentication mechanism in
addition to encrypting the messages. Popular choices are Message
Authentication Codes like @acronym{HMAC-SHA1} (@pxref{Keyed hash
functions}), or digital signatures like @acronym{RSA}.

Some ciphers have so called ``weak keys'', keys that results in
undesirable structure after the key setup processing, and should be
avoided. In Nettle, most key setup functions have no return value, but
for ciphers with weak keys, the return value indicates whether or not
the given key is weak. For good keys, key setup returns 1, and for weak
keys, it returns 0. When possible, avoid algorithms that
have weak keys. There are several good ciphers that don't have any weak
keys.

To encrypt a message, you first initialize a cipher context for
encryption or decryption with a particular key. You then use the context
to process plaintext or ciphertext messages. The initialization is known
as @dfn{key setup}. With Nettle, it is recommended to use each
context struct for only one direction, even if some of the ciphers use a
single key setup function that can be used for both encryption and
decryption.

@subsection AES
AES is a block cipher, specified by NIST as a replacement for
the older DES standard. The standard is the result of a competition
between cipher designers. The winning design, also known as RIJNDAEL,
was constructed by Joan Daemen and Vincent Rijnmen.

Like all the AES candidates, the winning design uses a block size of 128
bits, or 16 octets, and variable key-size, 128, 192 and 256 bits (16, 24
and 32 octets) being the allowed key sizes. It does not have any weak
keys. Nettle defines AES in @file{<nettle/aes.h>}.
 
@deftp {Context struct} {struct aes_ctx}
@end deftp

@defvr Constant AES_BLOCK_SIZE
The AES block-size, 16
@end defvr

@defvr Constant AES_MIN_KEY_SIZE
@end defvr

@defvr Constant AES_MAX_KEY_SIZE
@end defvr

@defvr Constant AES_KEY_SIZE
Default AES key size, 32
@end defvr

@deftypefun void aes_set_encrypt_key (struct aes_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
@deftypefunx void aes_set_decrypt_key (struct aes_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher, for encryption or decryption, respectively.
@end deftypefun

@deftypefun void aes_invert_key (struct aes_ctx *@var{dst}, const struct aes_ctx *@var{src})
Given a context @var{src} initialized for encryption, initializes the
context struct @var{dst} for decryption, using the same key. If the same
context struct is passed for both @code{src} and @code{dst}, it is
converted in place. Calling @code{aes_set_encrypt_key} and
@code{aes_invert_key} is more efficient than calling
@code{aes_set_encrypt_key} and @code{aes_set_decrypt_key}. This function
is mainly useful for applications which needs to both encrypt and
decrypt using the @emph{same} key.
@end deftypefun

@deftypefun void aes_encrypt (struct aes_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not overlap
in any other way.
@end deftypefun

@deftypefun void aes_decrypt (struct aes_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Analogous to @code{aes_encrypt}
@end deftypefun

@subsection ARCFOUR
ARCFOUR is a stream cipher, also known under the trade marked name RC4,
and it is one of the fastest ciphers around. A problem is that the key
setup of ARCFOUR is quite weak, you should never use keys with
structure, keys that are ordinary passwords, or sequences of keys like
``secret:1'', ``secret:2'', @enddots{}. If you have keys that don't look
like random bit strings, and you want to use ARCFOUR, always hash the
key before feeding it to ARCFOUR. Furthermore, the initial bytes of the
generated key stream leak information about the key; for this reason, it
is recommended to discard the first 512 bytes of the key stream.

@example
/* A more robust key setup function for ARCFOUR */
void
arcfour_set_key_hashed(struct arcfour_ctx *ctx,
                       unsigned length, const uint8_t *key)
@{
  struct sha256_ctx hash;
  uint8_t digest[SHA256_DIGEST_SIZE];
  uint8_t buffer[0x200];

  sha256_init(&hash);
  sha256_update(&hash, length, key);
  sha256_digest(&hash, SHA256_DIGEST_SIZE, digest);

  arcfour_set_key(ctx, SHA256_DIGEST_SIZE, digest);
  arcfour_crypt(ctx, sizeof(buffer), buffer, buffer);
@}
@end example

Nettle defines ARCFOUR in @file{<nettle/arcfour.h>}.

@deftp {Context struct} {struct arcfour_ctx}
@end deftp

@defvr Constant ARCFOUR_MIN_KEY_SIZE
Minimum key size, 1
@end defvr

@defvr Constant ARCFOUR_MAX_KEY_SIZE
Maximum key size, 256
@end defvr

@defvr Constant ARCFOUR_KEY_SIZE
Default ARCFOUR key size, 16
@end defvr

@deftypefun void arcfour_set_key (struct arcfour_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. 
@end deftypefun

@deftypefun void arcfour_crypt (struct arcfour_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Encrypt some data. The same function is used for both encryption and
decryption. Unlike the block ciphers, this function modifies the
context, so you can split the data into arbitrary chunks and encrypt
them one after another. The result is the same as if you had called
@code{arcfour_crypt} only once with all the data.
@end deftypefun

@subsection ARCTWO
ARCTWO (also known as the trade marked name RC2) is a block cipher
specified in RFC 2268. Nettle also include a variation of the ARCTWO
set key operation that lack one step, to be compatible with the
reverse engineered RC2 cipher description, as described in a Usenet
post to @code{sci.crypt} by Peter Gutmann.

ARCTWO uses a block size of 64 bits, and variable key-size ranging
from 1 to 128 octets. Besides the key, ARCTWO also has a second
parameter to key setup, the number of effective key bits, @code{ekb}.
This parameter can be used to artificially reduce the key size. In
practice, @code{ekb} is usually set equal to the input key size.
Nettle defines ARCTWO in @file{<nettle/arctwo.h>}.

We do not recommend the use of ARCTWO; the Nettle implementation is
provided primarily for interoperability with existing applications and
standards.

@deftp {Context struct} {struct arctwo_ctx}
@end deftp

@defvr Constant ARCTWO_BLOCK_SIZE
The ARCTWO block-size, 8
@end defvr

@defvr Constant ARCTWO_MIN_KEY_SIZE
@end defvr

@defvr Constant ARCTWO_MAX_KEY_SIZE
@end defvr

@defvr Constant ARCTWO_KEY_SIZE
Default ARCTWO key size, 8
@end defvr

@deftypefun void arctwo_set_key_ekb (struct arctwo_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key}, unsigned @var{ekb})
@deftypefunx void arctwo_set_key (struct arctwo_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
@deftypefunx void arctwo_set_key_gutmann (struct arctwo_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption
and decryption. The first function is the most general one, which lets
you provide both the variable size key, and the desired effective key
size (in bits). The maximum value for @var{ekb} is 1024, and for
convenience, @code{ekb = 0} has the same effect as @code{ekb = 1024}.

@code{arctwo_set_key(ctx, length, key)} is equivalent to
@code{arctwo_set_key_ekb(ctx, length, key, 8*length)}, and
@code{arctwo_set_key_gutmann(ctx, length, key)} is equivalent to
@code{arctwo_set_key_ekb(ctx, length, key, 1024)}
@end deftypefun

@deftypefun void arctwo_encrypt (struct arctwo_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not
overlap in any other way.
@end deftypefun

@deftypefun void arctwo_decrypt (struct arctwo_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Analogous to @code{arctwo_encrypt}
@end deftypefun

@subsection BLOWFISH

BLOWFISH is a block cipher designed by Bruce Schneier. It uses a block
size of 64 bits (8 octets), and a variable key size, up to 448 bits. It
has some weak keys. Nettle defines BLOWFISH in @file{<nettle/blowfish.h>}.

@deftp {Context struct} {struct blowfish_ctx}
@end deftp

@defvr Constant BLOWFISH_BLOCK_SIZE
The BLOWFISH block-size, 8
@end defvr

@defvr Constant BLOWFISH_MIN_KEY_SIZE
Minimum BLOWFISH key size, 8
@end defvr

@defvr Constant BLOWFISH_MAX_KEY_SIZE
Maximum BLOWFISH key size, 56
@end defvr

@defvr Constant BLOWFISH_KEY_SIZE
Default BLOWFISH key size, 16
@end defvr

@deftypefun int blowfish_set_key (struct blowfish_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. Checks for weak keys, returning 1
for good keys and 0 for weak keys. Applications that don't care about
weak keys can ignore the return value.

@code{blowfish_encrypt} or @code{blowfish_decrypt} with a weak key will
crash with an assert violation.
@end deftypefun

@deftypefun void blowfish_encrypt (struct blowfish_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not overlap
in any other way.
@end deftypefun

@deftypefun void blowfish_decrypt (struct blowfish_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Analogous to @code{blowfish_encrypt}
@end deftypefun

@subsection Camellia

Camellia is a block cipher developed by Mitsubishi and Nippon Telegraph
and Telephone Corporation, described in @cite{RFC3713}, and recommended
by some Japanese and European authorities as an alternative to AES. The
algorithm is patented. The implementation in Nettle is derived from the
implementation released by NTT under the GNU LGPL (v2.1 or later), and
relies on the implicit patent license of the LGPL. There is also a
statement of royalty-free licensing for Camellia at
@url{http://www.ntt.co.jp/news/news01e/0104/010417.html}, but this
statement has some limitations which seem problematic for free software.

Camellia uses a the same block size and key sizes as AES: The block size
is 128 bits (16 octets), and the supported key sizes are 128, 192, and
256 bits. Nettle defines Camellia in @file{<nettle/camellia.h>}.

@deftp {Context struct} {struct camellia_ctx}
@end deftp

@defvr Constant CAMELLIA_BLOCK_SIZE
The CAMELLIA block-size, 16
@end defvr

@defvr Constant CAMELLIA_MIN_KEY_SIZE
@end defvr

@defvr Constant CAMELLIA_MAX_KEY_SIZE
@end defvr

@defvr Constant CAMELLIA_KEY_SIZE
Default CAMELLIA key size, 32
@end defvr

@deftypefun void camellia_set_encrypt_key (struct camellia_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
@deftypefunx void camellia_set_decrypt_key (struct camellia_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher, for encryption or decryption, respectively.
@end deftypefun

@deftypefun void camellia_invert_key (struct camellia_ctx *@var{dst}, const struct camellia_ctx *@var{src})
Given a context @var{src} initialized for encryption, initializes the
context struct @var{dst} for decryption, using the same key. If the same
context struct is passed for both @code{src} and @code{dst}, it is
converted in place. Calling @code{camellia_set_encrypt_key} and
@code{camellia_invert_key} is more efficient than calling
@code{camellia_set_encrypt_key} and @code{camellia_set_decrypt_key}. This function
is mainly useful for applications which needs to both encrypt and
decrypt using the @emph{same} key.
@end deftypefun

@deftypefun void camellia_crypt (struct camellia_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
The same function is used for both encryption and decryption.
@var{length} must be an integral multiple of the block size. If it is
more than one block, the data is processed in ECB mode. @code{src} and
@code{dst} may be equal, but they must not overlap in any other way.
@end deftypefun

@subsection CAST128

CAST-128 is a block cipher, specified in @cite{RFC 2144}. It uses a 64
bit (8 octets) block size, and a variable key size of up to 128 bits.
Nettle defines cast128 in @file{<nettle/cast128.h>}.

@deftp {Context struct} {struct cast128_ctx}
@end deftp

@defvr Constant CAST128_BLOCK_SIZE
The CAST128 block-size, 8
@end defvr

@defvr Constant CAST128_MIN_KEY_SIZE
Minimum CAST128 key size, 5
@end defvr

@defvr Constant CAST128_MAX_KEY_SIZE
Maximum CAST128 key size, 16
@end defvr

@defvr Constant CAST128_KEY_SIZE
Default CAST128 key size, 16
@end defvr

@deftypefun void cast128_set_key (struct cast128_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. 
@end deftypefun

@deftypefun void cast128_encrypt (struct cast128_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not overlap
in any other way.
@end deftypefun

@deftypefun void cast128_decrypt (struct cast128_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Analogous to @code{cast128_encrypt}
@end deftypefun

@subsection DES
DES is the old Data Encryption Standard, specified by NIST. It uses a
block size of 64 bits (8 octets), and a key size of 56 bits. However,
the key bits are distributed over 8 octets, where the least significant
bit of each octet may be used for parity. A common way to use DES is to
generate 8 random octets in some way, then set the least significant bit
of each octet to get odd parity, and initialize DES with the resulting
key.

The key size of DES is so small that keys can be found by brute force,
using specialized hardware or lots of ordinary work stations in
parallel. One shouldn't be using plain DES at all today, if one uses
DES at all one should be using ``triple DES'', see DES3 below.

DES also has some weak keys. Nettle defines DES in @file{<nettle/des.h>}.

@deftp {Context struct} {struct des_ctx}
@end deftp

@defvr Constant DES_BLOCK_SIZE
The DES block-size, 8
@end defvr

@defvr Constant DES_KEY_SIZE
DES key size, 8
@end defvr

@deftypefun int des_set_key (struct des_ctx *@var{ctx}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. Parity bits are ignored. Checks for weak keys, returning 1
for good keys and 0 for weak keys. Applications that don't care about
weak keys can ignore the return value.
@end deftypefun

@deftypefun void des_encrypt (struct des_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not overlap
in any other way.
@end deftypefun

@deftypefun void des_decrypt (struct des_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Analogous to @code{des_encrypt}
@end deftypefun

@deftypefun int des_check_parity (unsigned @var{length}, const uint8_t *@var{key});
Checks that the given key has correct, odd, parity. Returns 1 for
correct parity, and 0 for bad parity.
@end deftypefun

@deftypefun void des_fix_parity (unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Adjusts the parity bits to match DES's requirements. You need this
function if you have created a random-looking string by a key agreement
protocol, and want to use it as a DES key. @var{dst} and @var{src} may
be equal.
@end deftypefun

@subsection DES3
The inadequate key size of DES has already been mentioned. One way to
increase the key size is to pipe together several DES boxes with
independent keys. It turns out that using two DES ciphers is not as
secure as one might think, even if the key size of the combination is a
respectable 112 bits.

The standard way to increase DES's key size is to use three DES boxes.
The mode of operation is a little peculiar: the middle DES box is wired
in the reverse direction. To encrypt a block with DES3, you encrypt it
using the first 56 bits of the key, then @emph{decrypt} it using the
middle 56 bits of the key, and finally encrypt it again using the last
56 bits of the key. This is known as ``ede'' triple-DES, for
``encrypt-decrypt-encrypt''.

The ``ede'' construction provides some backward compatibility, as you get
plain single DES simply by feeding the same key to all three boxes. That
should help keeping down the gate count, and the price, of hardware
circuits implementing both plain DES and DES3.

DES3 has a key size of 168 bits, but just like plain DES, useless parity
bits are inserted, so that keys are represented as 24 octets (192 bits).
As a 112 bit key is large enough to make brute force attacks
impractical, some applications uses a ``two-key'' variant of triple-DES.
In this mode, the same key bits are used for the first and the last DES
box in the pipe, while the middle box is keyed independently. The
two-key variant is believed to be secure, i.e. there are no known
attacks significantly better than brute force.

Naturally, it's simple to implement triple-DES on top of Nettle's DES
functions. Nettle includes an implementation of three-key ``ede''
triple-DES, it is defined in the same place as plain DES,
@file{<nettle/des.h>}.

@deftp {Context struct} {struct des3_ctx}
@end deftp

@defvr Constant DES3_BLOCK_SIZE
The DES3 block-size is the same as DES_BLOCK_SIZE, 8
@end defvr

@defvr Constant DES3_KEY_SIZE
DES key size, 24
@end defvr

@deftypefun int des3_set_key (struct des3_ctx *@var{ctx}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. Parity bits are ignored. Checks for weak keys, returning 1
if all three keys are good keys, and 0 if one or more key is weak.
Applications that don't care about weak keys can ignore the return
value.
@end deftypefun

For random-looking strings, you can use @code{des_fix_parity} to adjust
the parity bits before calling @code{des3_set_key}.

@deftypefun void des3_encrypt (struct des3_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not overlap
in any other way.
@end deftypefun

@deftypefun void des3_decrypt (struct des3_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Analogous to @code{des_encrypt}
@end deftypefun

@subsection Salsa20
Salsa20 is a fairly recent stream cipher designed by D. J. Bernstein. It
is built on the observation that a cryptographic hash function can be
used for encryption: Form the hash input from the secret key and a
counter, xor the hash output and the first block of the plaintext, then
increment the counter to process the next block (similar to CTR mode, see
@pxref{CTR}). Bernstein defined an encryption algorithm, Snuffle,
in this way to ridicule United States export restrictions which treated hash
functions as nice and harmless, but ciphers as dangerous munitions.

Salsa20 uses the same idea, but with a new specialized hash function to
mix key, block counter, and a couple of constants (input and output are
the same size, making it not directly applicable for use as a general
hash function). It's also designed for speed; on x86_64, it is currently
the fastest cipher offered by nettle. It uses a block size of 512 bits
(64 octets) and there are two specified key sizes, 128 and 256 bits (16
and 32 octets).

When using Salsa20 to process a message, one specifies both a key and a
@dfn{nonce}, the latter playing a similar rôle to the initialization
vector (@acronym{IV}) used with @acronym{CBC} or @acronym{CTR} mode. For
this reason, Nettle uses the term @acronym{IV} to refer to the Salsa20
nonce. One can use the same key for several messages, provided one uses
a unique random @acronym{iv} for each message. The @acronym{iv} is 64
bits (8 octets). The block counter is initialized to zero for each
message, and is also 64 bits (8 octets). Nettle defines Salsa20 in
@file{<nettle/salsa20.h>}.

@deftp {Context struct} {struct salsa20_ctx}
@end deftp

@defvr Constant SALSA20_MIN_KEY_SIZE
@defvrx Constant SALSA20_MAX_KEY_SIZE
The two supported key sizes, 16 and 32 octets.
@end defvr

@defvr Constant SALSA20_KEY_SIZE
Recommended key size, 32.
@end defvr

@defvr Constant SALSA20_BLOCK_SIZE
Salsa20 block size, 64.
@end defvr

@defvr Constant SALSA20_IV_SIZE
Size of the @acronym{IV}, 8.
@end defvr

@deftypefun void salsa20_set_key (struct salsa20_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. Before using the cipher, you @emph{must} also call
@code{salsa20_set_iv}, see below.
@end deftypefun

@deftypefun void salsa20_set_iv (struct salsa20_ctx *@var{ctx}, const uint8_t *@var{iv})
Sets the @acronym{IV}. It is always of size @code{SALSA20_IV_SIZE}, 8
octets. This function also initializes the block counter, setting it to
zero.
@end deftypefun

@deftypefun void salsa20_crypt (struct salsa20_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Encrypts or decrypts the data of a message, using salsa20. When a
message is encrypted using a sequence of calls to @code{salsa20_crypt},
all but the last call @emph{must} use a length that is a multiple of
@code{SALSA20_BLOCK_SIZE}.

@end deftypefun

@subsection SERPENT
SERPENT is one of the AES finalists, designed by Ross Anderson, Eli
Biham and Lars Knudsen. Thus, the interface and properties are similar
to AES'. One peculiarity is that it is quite pointless to use it with
anything but the maximum key size, smaller keys are just padded to
larger ones. Nettle defines SERPENT in @file{<nettle/serpent.h>}.

@deftp {Context struct} {struct serpent_ctx}
@end deftp

@defvr Constant SERPENT_BLOCK_SIZE
The SERPENT block-size, 16
@end defvr

@defvr Constant SERPENT_MIN_KEY_SIZE
Minimum SERPENT key size, 16
@end defvr

@defvr Constant SERPENT_MAX_KEY_SIZE
Maximum SERPENT key size, 32
@end defvr

@defvr Constant SERPENT_KEY_SIZE
Default SERPENT key size, 32
@end defvr

@deftypefun void serpent_set_key (struct serpent_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. 
@end deftypefun

@deftypefun void serpent_encrypt (struct serpent_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})