nettle.texinfo 63.8 KB
Newer Older
Niels Möller's avatar
Niels Möller committed
1 2 3 4 5 6 7
\input texinfo          @c -*-texinfo-*-

@c %**start of header
@setfilename nettle.info
@settitle The Nettle low-level cryptographic library.
@c %**end of header

8
@footnotestyle end
Niels Möller's avatar
Niels Möller committed
9 10 11 12 13 14 15
@syncodeindex fn cp

@dircategory GNU Libraries
@direntry
* Nettle: (nettle).           A low-level cryptographics library.
@end direntry

16
@set UPDATED-FOR 1.0
Niels Möller's avatar
Niels Möller committed
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91

@c Latin-1 doesn't work with tex output.
@c Also lookout for é characters.

@set AUTHOR Niels Möller
@ifinfo
Draft manual for the Nettle library. This manual corresponds to version
@value{UPDATED-FOR}.

Copyright 2001 @value{AUTHOR}

Permission is granted to make and distribute verbatim
copies of this manual provided the copyright notice and
this permission notice are preserved on all copies.

@ignore
Permission is granted to process this file through TeX
and print the results, provided the printed document
carries a copying permission notice identical to this
one except for the removal of this paragraph (this
paragraph not being relevant to the printed manual).

@end ignore
Permission is granted to copy and distribute modified
versions of this manual under the conditions for
verbatim copying, provided also that the sections
entitled ``Copying'' and ``GNU General Public License''
are included exactly as in the original, and provided
that the entire resulting derived work is distributed
under the terms of a permission notice identical to this
one.

Permission is granted to copy and distribute
translations of this manual into another language,
under the above conditions for modified versions,
except that this permission notice may be stated in a
translation approved by the Free Software Foundation.

@end ifinfo

@titlepage
@sp 10
@c @center @titlefont{Nettle Manual}

@title Nettle Manual
@subtitle For the Nettle Library version @value{UPDATED-FOR}

@author @value{AUTHOR}

@c The following two commands start the copyright page.
@page
@vskip 0pt plus 1filll
Copyright @copyright{} 2001 @value{AUTHOR}

Permission is granted to make and distribute verbatim
copies of this manual provided the copyright notice and
this permission notice are preserved on all copies.

Permission is granted to copy and distribute modified
versions of this manual under the conditions for
verbatim copying, provided also that the sections
entitled ``Copying'' and ``GNU General Public License''
are included exactly as in the original, and provided
that the entire resulting derived work is distributed
under the terms of a permission notice identical to this
one.

Permission is granted to copy and distribute
translations of this manual into another language,
under the above conditions for modified versions,
except that this permission notice may be stated in a
translation approved by the Free Software Foundation.

@end titlepage

92 93
@contents

Niels Möller's avatar
Niels Möller committed
94 95 96 97 98 99 100 101 102 103 104 105 106
@ifnottex
@node     Top, Introduction, (dir), (dir)
@comment  node-name,  next,  previous,  up
@top

This document describes the nettle low-level cryptographic library. You
can use the library directly from your C-programs, or (recommended)
write or use an object-oriented wrapper for your favourite language or
application.

This manual coresponds to version @value{UPDATED-FOR} of the library.

@menu
Niels Möller's avatar
Niels Möller committed
107 108
* Introduction::                What is Nettle?
* Copyright::                   Your rights.
Niels Möller's avatar
Niels Möller committed
109 110
* Conventions::                 
* Example::                     
Niels Möller's avatar
Niels Möller committed
111 112 113
* Reference::                   All Nettle functions and features.
* Nettle soup::                 For the serious nettle hacker.
* Installation::                How to install Nettle.
Niels Möller's avatar
Niels Möller committed
114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130
* Index::                       
@end menu

@end ifnottex

@node Introduction, Copyright, Top, Top
@comment  node-name,  next,  previous,  up
@chapter Introduction

Nettle is a cryptographic library that is designed to fit easily in more
or less any context: In crypto toolkits for object-oriented languages
(C++, Python, Pike, ...), in applications like LSH or GNUPG, or even in
kernel space. In most contexts, you need more than the basic
cryptographic algorithms, you also need some way to keep track of available
algorithms, their properties and variants. You often have some algorithm
selection process, often dictated by a protocol you want to implement.

131
And as the requirements of applications differ in subtle and not so
Niels Möller's avatar
Niels Möller committed
132 133 134 135 136 137 138 139 140 141
subtle ways, an API that fits one application well can be a pain to use
in a different context. And that is why there are so many different
cryptographic libraries around.

Nettle tries to avoid this problem by doing one thing, the low-level
crypto stuff, and providing a @emph{simple} but general interface to it.
In particular, Nettle doesn't do algorithm selection. It doesn't do
memory allocation. It doesn't do any I/O.

The idea is that one can build several application and context specific
142
interfaces on top of Nettle, and share the code, testcases, benchmarks,
Niels Möller's avatar
Niels Möller committed
143 144 145 146
documentation, etc. For this first version, the only application using
Nettle is LSH, and it uses an object-oriented abstraction on top of the
library. 

147 148 149 150
This manual explains how to use the Nettle library. It also tries to
provide some background on the cryptography, and advice on how to best
put it to use.

Niels Möller's avatar
Niels Möller committed
151 152 153 154
@node Copyright, Conventions, Introduction, Top
@comment  node-name,  next,  previous,  up
@chapter Copyright

155 156 157 158 159 160 161 162
Nettle is distributed under the GNU General Public License (GPL) (see
the file COPYING for details). However, most of the individual files
are dual licensed under less restrictive licenses like the GNU Lesser
General Public License (LGPL), or are in the public domain. This means
that if you don't use the parts of nettle that are GPL-only, you have
the option to use the Nettle library just as if it were licensed under
the LGPL. To find the current status of particular files, you have to
read the copyright notices at the top of the files.
Niels Möller's avatar
Niels Möller committed
163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195

A list of the supported algorithms, their origins and licenses:

@table @emph
@item AES
The implementation of the AES cipher (also known as rijndael) is written
by Rafael Sevilla. Released under the LGPL.

@item ARCFOUR
The implementation of the ARCFOUR (also known as RC4) cipher is written
by Niels Möller. Released under the LGPL.

@item BLOWFISH
The implementation of the BLOWFISH cipher is written by Werner Koch,
copyright owned by the Free Software Foundation. Also hacked by Ray
Dassen and Niels Möller. Released under the GPL.

@item CAST128
The implementation of the CAST128 cipher is written by Steve Reid.
Released into the public domain.

@item DES
The implementation of the DES cipher is written by Dana L. How, and
released under the LGPL.

@item MD5
The implementation of the MD5 message digest is written by Colin Plumb.
It has been hacked some more by Andrew Kuchling and Niels Möller.
Released into the public domain.

@item SERPENT
The implementation of the SERPENT cipher is written by Ross Anderson,
Eli Biham, and Lars Knudsen, adapted to LSH by Rafael Sevilla, and to
196
Nettle by Niels Möller. Released under the GPL.
Niels Möller's avatar
Niels Möller committed
197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213

@item SHA1
The implementation of the SHA1 message digest is written by Peter
Gutmann, and hacked some more by Andrew Kuchling and Niels Möller.
Released into the public domain.

@item TWOFISH
The implementation of the TWOFISH cipher is written by Ruud de Rooij.
Released under the LGPL.
@end table

@node Conventions, Example, Copyright, Top
@comment  node-name,  next,  previous,  up
@chapter Conventions

For each supported algorithm, there is an include file that defines a
@emph{context struct}, a few constants, and declares functions for
214
operating on the context. The context struct encapsulates all information
Niels Möller's avatar
Niels Möller committed
215 216 217
needed by the algorithm, and it can be copied or moved in memory with no
unexpected effects.

218 219 220 221 222 223 224 225
For consistency, functions for different algorithms are very similar,
but there are some differences, for instance reflecting if the key setup
or encryption function differ for encryption and encryption, and whether
or not key setup can fail. There are also differences between algorithms
that don't show in function prototypes, but which the application must
nevertheless be aware of. There is no big difference between the
functions for stream ciphers and for block ciphers, although they should
be used quite differently by the application.
Niels Möller's avatar
Niels Möller committed
226 227 228 229 230 231 232 233 234 235 236

If your application uses more than one algorithm, you should probably
create an interface that is tailor-made for your needs, and then write a
few lines of glue code on top of Nettle.

By convention, for an algorithm named @code{foo}, the struct tag for the
context struct is @code{foo_ctx}, constants and functions uses prefixes
like @code{FOO_BLOCK_SIZE} (a constant) and @code{foo_set_key} (a
function).

In all functions, strings are represented with an explicit length, of
237
type @code{unsigned}, and a pointer of type @code{uint8_t *} or
Niels Möller's avatar
Niels Möller committed
238 239 240 241
@code{const uint8_t *}. For functions that transform one string to
another, the argument order is length, destination pointer and source
pointer. Source and destination areas are of the same length. Source and
destination may be the same, so that you can process strings in place,
242
but they @emph{must not} overlap in any other way.
Niels Möller's avatar
Niels Möller committed
243 244 245 246 247 248 249 250 251 252 253 254 255

@node Example, Reference, Conventions, Top
@comment  node-name,  next,  previous,  up
@chapter Example

A simple example program that reads a file from standard in and writes
its SHA1 checksum on stdout should give the flavour of Nettle.

@example
/* FIXME: This code is untested. */
#include <stdio.h>
#include <stdlib.h>

256
#include <nettle/sha.h>
Niels Möller's avatar
Niels Möller committed
257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297

#define BUF_SIZE 1000

static void
display_hex(unsigned length, uint8_t *data)
@{
  static const char digits[16] = "0123456789abcdef";
  unsigned i;

  for (i = 0; i<length; i++)
  @{
    uint8_t byte = data[i];
    printf("%c%c ", digits[(byte / 16) & 0xf], digits[byte & 0xf]);
  @}
@}

int
main(int argc, char **argv)
@{
  struct sha1_ctx ctx;
  uint8_t buffer[BUF_SIZE];
  uint8_t digest[SHA1_DIGEST_SIZE];
  
  sha1_init(&ctx);
  for (;;)
  @{
    int done = fread(buffer, 1, sizeof(buffer), stdin);
    if (done <= 0)
      break;
    sha1_update(&ctx, done, buf);
  @}
  if (ferror(stdin))
    return EXIT_FAILURE;

  sha1_digest(&ctx, SHA1_DIGEST_SIZE, digest);

  display_hex(SHA1_DIGEST_SIZE, digest);
  return EXIT_SUCCESS;  
@}
@end example

Niels Möller's avatar
Niels Möller committed
298
@node Reference, Nettle soup, Example, Top
Niels Möller's avatar
Niels Möller committed
299 300 301 302 303 304 305 306
@comment  node-name,  next,  previous,  up
@chapter Reference

This chapter describes all the Nettle functions, grouped by family.

@menu
* Hash functions::              
* Cipher functions::            
307
* Cipher Block Chaining::       
Niels Möller's avatar
Niels Möller committed
308
* Keyed hash functions::        
309 310
* Public-key algorithms::       
* Randomness::                  
Niels Möller's avatar
Niels Möller committed
311
* Miscellaneous functions::     
312
* Compatibility functions::     
Niels Möller's avatar
Niels Möller committed
313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338
@end menu

@node Hash functions, Cipher functions, Reference, Reference
@comment  node-name,  next,  previous,  up
@section Hash functions

A cryptographic @dfn{hash function} is a function that takes variable
size strings, and maps them to strings of fixed, short, length. There
are naturally lots of collisions, as there are more possible 1MB files
than 20 byte strings. But the function is constructed such that is hard
to find the collisions. More precisely, a cryptographic hash function
@code{H} should have the following properties:

@table @emph

@item One-way
Given a hash value @code{H(x)} it is hard to find a string @code{x}
that hashes to that value.

@item Collision-resistant
It is hard to find two different strings, @code{x} and @code{y}, such
that @code{H(x)} = @code{H(y)}.

@end table

Hash functions are useful as building blocks for digital signatures,
339
message authentication codes, pseudo random generators, association of
Niels Möller's avatar
Niels Möller committed
340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368
unique id:s to documents, and many other things.

@subsection @acronym{MD5}

MD5 is a message digest function constructed by Ronald Rivest, and
described in @cite{RFC 1321}. It outputs message digests of 128 bits, or
16 octets. Nettle defines MD5 in @file{<nettle/md5.h>}.

@deftp {Context struct} {struct md5_ctx}
@end deftp

@defvr Constant MD5_DIGEST_SIZE
The size of an MD5 digest, i.e. 16.
@end defvr

@defvr Constant MD5_DATA_SIZE
The internal block size of MD5. Useful for some special constructions,
in particular HMAC-MD5.
@end defvr

@deftypefun void md5_init (struct md5_ctx *@var{ctx})
Initialize the MD5 state.
@end deftypefun

@deftypefun void md5_update (struct md5_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void md5_digest (struct md5_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
369 370 371 372
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{MD5_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.
Niels Möller's avatar
Niels Möller committed
373

374 375
This function also resets the context in the same way as
@code{md5_init}.
Niels Möller's avatar
Niels Möller committed
376 377 378
@end deftypefun

The normal way to use MD5 is to call the functions in order: First
379 380 381 382
@code{md5_init}, then @code{md5_update} zero or more times, and finally
@code{md5_digest}. After @code{md5_digest}, the context is reset to
its initial state, so you can start over calling @code{md5_update} to
hash new data.
Niels Möller's avatar
Niels Möller committed
383 384 385 386 387 388

To start over, you can call @code{md5_init} at any time.

@subsection @acronym{SHA1}

SHA1 is a hash function specified by @dfn{NIST} (The U.S. National Institute
389 390
for Standards and Technology). It outputs hash values of 160 bits, or 20
octets. Nettle defines SHA1 in @file{<nettle/sha.h>}.
Niels Möller's avatar
Niels Möller committed
391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413

The functions are analogous to the MD5 ones.

@deftp {Context struct} {struct sha1_ctx}
@end deftp

@defvr Constant SHA1_DIGEST_SIZE
The size of an SHA1 digest, i.e. 20.
@end defvr

@defvr Constant SHA1_DATA_SIZE
The internal block size of SHA1. Useful for some special constructions,
in particular HMAC-SHA1.
@end defvr

@deftypefun void sha1_init (struct sha1_ctx *@var{ctx})
Initialize the SHA1 state.
@end deftypefun

@deftypefun void sha1_update (struct sha1_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

414 415 416 417 418 419 420 421
@deftypefun void sha1_digest (struct sha1_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{SHA1_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context in the same way as
@code{sha1_init}.
Niels Möller's avatar
Niels Möller committed
422 423
@end deftypefun

424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457
@subsection @acronym{SHA256}

SHA256 is another hash function specified by @dfn{NIST}, intended as a
replacement for @acronym{SHA1}, generating larger digests. It outputs
hash values of 256 bits, or 32 octets. Nettle defines SHA256 in
@file{<nettle/sha.h>}.

The functions are analogous to the MD5 ones.

@deftp {Context struct} {struct sha256_ctx}
@end deftp

@defvr Constant SHA256_DIGEST_SIZE
The size of an SHA256 digest, i.e. 20.
@end defvr

@defvr Constant SHA256_DATA_SIZE
The internal block size of SHA256. Useful for some special constructions,
in particular HMAC-SHA256.
@end defvr

@deftypefun void sha256_init (struct sha256_ctx *@var{ctx})
Initialize the SHA256 state.
@end deftypefun

@deftypefun void sha256_update (struct sha256_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void sha256_digest (struct sha256_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{SHA256_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.
Niels Möller's avatar
Niels Möller committed
458

459 460
This function also resets the context in the same way as
@code{sha256_init}.
Niels Möller's avatar
Niels Möller committed
461 462
@end deftypefun

Niels Möller's avatar
Niels Möller committed
463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484
@subsection @code{struct nettle_hash}

Nettle includes a struct including information about the supported hash
functions. It is defined in @file{<nettle/nettle-meta.h>}, and is used
by Nettle's implementation of @acronym{HMAC} @pxref{Keyed hash
functions}.

@deftp {Meta struct} @code{struct nettle_hash} name context_size digest_size block_size init update digest
The last three attributes are function pointers, of types
@code{nettle_hash_init_func}, @code{nettle_hash_update_func}, and
@code{nettle_hash_digest_func}. The first argument to these functions is
@code{void *} pointer so a context struct, which is of size
@code{context_size}. 
@end deftp

@deftypevr {Constant Struct} {struct nettle_cipher} nettle_md5
@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_sha1
@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_sha256

These are all the hash functions that Nettle implements.
@end deftypevr

485
@node Cipher functions, Cipher Block Chaining, Hash functions, Reference
Niels Möller's avatar
Niels Möller committed
486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506
@comment  node-name,  next,  previous,  up
@section Cipher functions

A @dfn{cipher} is a function that takes a message or @dfn{plaintext}
and a secret @dfn{key} and transforms it to a @dfn{ciphertext}. Given
only the ciphertext, but not the key, it should be hard to find the
cleartext. Given matching pairs of plaintext and ciphertext, it should
be hard to find the key.

There are two main classes of ciphers: Block ciphers and stream ciphers.

A block cipher can process data only in fixed size chunks, called
@dfn{blocks}. Typical block sizes are 8 or 16 octets. To encrypt
arbitrary messages, you usually have to pad it to an integral number of
blocks, split it into blocks, and then process each block. The simplest
way is to process one block at a time, independent of each other. That
mode of operation is called @dfn{ECB}, Electronic Code Book mode.
However, using ECB is usually a bad idea. For a start, plaintext blocks
that are equal are transformed to ciphertext blocks that are equal; that
leaks information about the plaintext. Usually you should apply the
cipher is some feedback mode, @dfn{CBC} (Cipher Block Chaining) being one
507
of the most popular. @xref{Cipher Block Chaining}, for information on
Niels Möller's avatar
Niels Möller committed
508
how to apply @acronym{CBC} with Nettle.
Niels Möller's avatar
Niels Möller committed
509 510 511 512 513 514 515 516 517 518 519 520 521

A stream cipher can be used for messages of arbitrary length; a typical
stream cipher is a keyed pseudorandom generator. To encrypt a plaintext
message of @var{n} octets, you key the generator, generate @var{n}
octets of pseudorandom data, and XOR it with the plaintext. To decrypt,
regenerate the same stream using the key, XOR it to the ciphertext, and
the plaintext is recovered.

@strong{Caution:} The first rule for this kind of cipher is the
same as for a One Time Pad: @emph{never} ever use the same key twice.

A common misconception is that encryption, by itself, implies
authentication. Say that you and a friend share a secret key, and you
522 523 524
receive an encrypted message. You apply the key, and get a cleartext
message that makes sense to you. Can you then be sure that it really was
your friend that wrote the message you're reading? The anser is no. For
Niels Möller's avatar
Niels Möller committed
525 526 527 528
example, if you were using a block cipher in ECB mode, an attacker may
pick up the message on its way, and reorder, delete or repeat some of
the blocks. Even if the attacker can't decrypt the message, he can
change it so that you are not reading the same message as your friend
Niels Möller's avatar
Niels Möller committed
529 530 531 532
wrote. If you are using a block cipher in @acronym{CBC} mode rather than
ECB, or are using a stream cipher, the possibilities for this sort of
attack are different, but the attacker can still make predictable
changes to the message.
Niels Möller's avatar
Niels Möller committed
533 534 535

It is recommended to @emph{always} use an authentication mechanism in
addition to encrypting the messages. Popular choices are Message
Niels Möller's avatar
Niels Möller committed
536
Authetication Codes like @acronym{HMAC-SHA1} @pxref{Keyed hash
537
functions}, or digital signatures like @acronym{RSA}.
Niels Möller's avatar
Niels Möller committed
538 539 540 541 542 543 544 545 546 547

Some ciphers have so called "weak keys", keys that results in
undesirable structure after the key setup processing, and should be
avoided. In Nettle, the presence of weak keys for a cipher mean that the
key setup function can fail, so you have to check its return value. In
addition, the context struct has a field @code{status}, that is set to a
non-zero value if key setup fails. When possible, avoid algorithm that
have weak keys. There are several good ciphers that don't have any weak
keys.

548 549 550 551 552 553 554 555
To encrypt a message, you first initialize a cipher context for
encryption or decryption with a particular key. You then use the context
to process plaintext or ciphertext messages. The initialization is known
as called @dfn{key setup}. With Nettle, it is recommended to use each
context struct for only one direction, even if some of the ciphers use a
single key setup function that can be used for both encryption and
decryption.

Niels Möller's avatar
Niels Möller committed
556 557
@subsection AES
AES is a quite new block cipher, specified by NIST as a replacement for
558 559 560
the older DES standard. The standarad is the result of a competition
between cipher designers. The winning design, also known as RIJNDAEL,
was constructed by Joan Daemen and Vincent Rijnmen.
Niels Möller's avatar
Niels Möller committed
561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611

Like all the AES candidates, the winning design uses a block size of 128
bits, or 16 octets, and variable keysize, 128, 192 and 256 bits (16, 24
and 32 octets) being the allowed key sizes. It does not have any weak
keys. Nettle defines AES in @file{<nettle/aes.h>}.
 
@deftp {Context struct} {struct aes_ctx}
@end deftp

@defvr Constant AES_BLOCK_SIZE
The AES blocksize, 16
@end defvr

@defvr Constant AES_MIN_KEY_SIZE
@end defvr

@defvr Constant AES_MAX_KEY_SIZE
@end defvr

@defvr Constant AES_KEY_SIZE
Default AES key size, 32
@end defvr

@deftypefun void aes_set_key (struct aes_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. 
@end deftypefun

@deftypefun void aes_encrypt (struct aes_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{dst}, uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not overlap
in any other way.
@end deftypefun

@deftypefun void aes_decrypt (struct aes_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{dst}, uint8_t *@var{src})
Analogous to @code{aes_encrypt}
@end deftypefun

@subsection ARCFOUR
ARCFOUR is a stream cipher, also known under the trade marked name RC4,
and it is one of the fastest ciphers around. A problem is that the key
setup of ARCFOUR is quite weak, you should never use keys with
structure, keys that are ordinary passwords, or sequences of keys like
"secret:1", "secret:2", @enddots{}. If you have keys that don't look
like random bit strings, and you want to use ARCFOUR, always hash the
key before feeding it to ARCFOUR. For example

@example
/* A more robust key setup function for ARCFOUR */
void
612 613
arcfour_set_key_hashed(struct arcfour_ctx *ctx,
                       unsigned length, const uint8_t *key)
Niels Möller's avatar
Niels Möller committed
614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657
@{
  struct sha1_ctx hash;
  uint8_t digest[SHA1_DIGEST_SIZE];

  sha1_init(&hash);
  sha1_update(&hash, length, key);
  sha1_digest(&hash, SHA1_DIGEST_SIZE, digest);

  arcfour_set_key(ctx, SHA1_DIGEST_SIZE, digest);
@}
@end example

Nettle defines ARCFOUR in @file{<nettle/arcfour.h>}.

@deftp {Context struct} {struct arcfour_ctx}
@end deftp

@defvr Constant ARCFOUR_MIN_KEY_SIZE
Minimum key size, 1
@end defvr

@defvr Constant ARCFOUR_MAX_KEY_SIZE
Maximum key size, 256
@end defvr

@defvr Constant ARCFOUR_KEY_SIZE
Default ARCFOUR key size, 16
@end defvr

@deftypefun void arcfour_set_key (struct arcfour_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. 
@end deftypefun

@deftypefun void arcfour_crypt (struct arcfour_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Encrypt some data. The same function is used for both encryption and
decryption. Unlike the block ciphers, this function modifies the
context, so you can split the data into arbitrary chunks and encrypt
them one after another. The result is the same as if you had called
@code{arcfour_crypt} only once with all the data.
@end deftypefun

@subsection CAST128

658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696
CAST-128 is a block cipher, specified in @cite{RFC 2144}. It uses a 64
bit (8 octets) block size, and a variable key size of up to 128 bits.
Nettle defines cast128 in @file{<nettle/cast128.h>}.

@deftp {Context struct} {struct cast128_ctx}
@end deftp

@defvr Constant CAST128_BLOCK_SIZE
The CAST128 blocksize, 8
@end defvr

@defvr Constant CAST128_MIN_KEY_SIZE
Minumim CAST128 key size, 5
@end defvr

@defvr Constant CAST128_MAX_KEY_SIZE
Maximum CAST128 key size, 16
@end defvr

@defvr Constant CAST128_KEY_SIZE
Default CAST128 key size, 16
@end defvr

@deftypefun void cast128_set_key (struct cast128_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. 
@end deftypefun

@deftypefun void cast128_encrypt (struct cast128_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{dst}, uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not overlap
in any other way.
@end deftypefun

@deftypefun void cast128_decrypt (struct cast128_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{dst}, uint8_t *@var{src})
Analogous to @code{cast128_encrypt}
@end deftypefun

Niels Möller's avatar
Niels Möller committed
697 698
@subsection BLOWFISH

699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739
BLOWFISH is a block cipher designed by Bruce Schneier. It uses a block
size of 64 bits (8 octets), and a variable key size, up to 448 bits. It
has some weak keys. Nettle defines BLOWFISH in @file{<nettle/blowfish.h>}.

@deftp {Context struct} {struct blowfish_ctx}
@end deftp

@defvr Constant BLOWFISH_BLOCK_SIZE
The BLOWFISH blocksize, 8
@end defvr

@defvr Constant BLOWFISH_MIN_KEY_SIZE
Minimum BLOWFISH key size, 8
@end defvr

@defvr Constant BLOWFISH_MAX_KEY_SIZE
Maximum BLOWFISH key size, 56
@end defvr

@defvr Constant BLOWFISH_KEY_SIZE
Default BLOWFISH key size, 16
@end defvr

@deftypefun int blowfish_set_key (struct blowfish_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. Returns 1 on success, and 0 if the key was weak. Calling
@code{blowfish_encrypt} or @code{blowfish_decrypt} with a weak key will
crash with an assert violation.
@end deftypefun

@deftypefun void blowfish_encrypt (struct blowfish_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{dst}, uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not overlap
in any other way.
@end deftypefun

@deftypefun void blowfish_decrypt (struct blowfish_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{dst}, uint8_t *@var{src})
Analogous to @code{blowfish_encrypt}
@end deftypefun

Niels Möller's avatar
Niels Möller committed
740
@subsection DES
741 742 743 744 745 746 747 748 749 750 751
DES is the old Data Encryption Standard, specified by NIST. It uses a
block size of 64 bits (8 octets), and a key size of 56 bits. However,
the key bits are distributed over 8 octets, where the least significant
bit of each octet is used for parity. A common way to use DES is to
generate 8 random octets in some way, then set the least significant bit
of each octet to get odd parity, and initialize DES with the resulting
key.

The key size of DES is so small that keys can be found by brute force,
using specialized hardware or lots of ordinary work stations in
parallell. One shouldn't be using plain DES at all today, if one uses
752
DES at all one should be using DES3 or "triple DES", see below.
753 754 755 756 757 758 759 760 761 762 763 764 765 766

DES also has some weak keys. Nettle defines DES in @file{<nettle/des.h>}.

@deftp {Context struct} {struct des_ctx}
@end deftp

@defvr Constant DES_BLOCK_SIZE
The DES blocksize, 8
@end defvr

@defvr Constant DES_KEY_SIZE
DES key size, 8
@end defvr

767
@deftypefun int des_set_key (struct des_ctx *@var{ctx}, const uint8_t *@var{key})
768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783
Initialize the cipher. The same function is used for both encryption and
decryption. Returns 1 on success, and 0 if the key was weak or had bad
parity. Calling @code{des_encrypt} or @code{des_decrypt} with a bad key
will crash with an assert violation.
@end deftypefun

@deftypefun void des_encrypt (struct des_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{dst}, uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not overlap
in any other way.
@end deftypefun

@deftypefun void des_decrypt (struct des_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{dst}, uint8_t *@var{src})
Analogous to @code{des_encrypt}
@end deftypefun
Niels Möller's avatar
Niels Möller committed
784

785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857
@deftypefun void des_fix_parity (unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Adjusts the parity bits to match DES's requirements. You need this
function if you have created a random-looking string by a key agreement
protocol, and want to use it as a DES key. @var{dst} and @var{src} may
be equal.
@end deftypefun

@subsection DES3
The inadequate key size of DES has already been mentioned. One way to
increase the key size is to pipe together several DES boxes with
independent keys. It turns out that using two DES ciphers is not as
secure as one might think, even if the key size of the combination is a
respectable 112 bits.

The standard way to increase DES's key size is to use three DES boxes.
The mode of operation is a little peculiar: the middle DES box is wired
in the reverse direction. To encrypt a block with DES3, you encrypt it
using the first 56 bits of the key, then @emph{decrypt} it using the
middle 56 bits of the key, and finally encrypt it again using the last
56 bits of the key. This is known as "ede" triple-DES, for
"encrypt-decrypt-encrypt".

The "ede" construction provides some backward compatibility, as you get
plain single DES simply by feeding the same key to all three boxes. That
should help keeping down the gate count, and the price, of hardware
circuits implementing both plain DES and DES3.

DES3 has a key size of 168 bits, but just like plain DES, useless parity
bits are inserted, so that keys are represented as 24 octets (192 bits).
As a 112 bit key is large enough to make brute force attacks
impractical, some applications uses a "two-key" variant of triple-DES.
In this mode, the same key bits are used for the first and the last DES
box in the pipe, while the middle box is keyed independently. The
two-key variant is believed to be secure, i.e. there are no known
attacks significantly better than brute force.

Naturally, it's simple to implement triple-DES on top of Nettle's DES
functions. Nettle includes an inplementation of three-key "ede"
triple-DES, it is defined in the same place as plain DES,
@file{<nettle/des.h>}.

@deftp {Context struct} {struct des3_ctx}
@end deftp

@defvr Constant DES3_BLOCK_SIZE
The DES3 blocksize is the same as DES_BLOCK_SIZE, 8
@end defvr

@defvr Constant DES3_KEY_SIZE
DES key size, 24
@end defvr

@deftypefun int des3_set_key (struct des3_ctx *@var{ctx}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. Returns 1 on success, and 0 if the key was weak or had bad
parity. Calling @code{des_encrypt} or @code{des_decrypt} with a bad key
will crash with an assert violation.
@end deftypefun

For random-looking strings, you can use @code{des_fix_parity} to adjust
the parity bits before calling @code{des3_set_key}.

@deftypefun void des3_encrypt (struct des3_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{dst}, uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not overlap
in any other way.
@end deftypefun

@deftypefun void des3_decrypt (struct des3_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{dst}, uint8_t *@var{src})
Analogous to @code{des_encrypt}
@end deftypefun

Niels Möller's avatar
Niels Möller committed
858
@subsection SERPENT
859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899
SERPENT is one of the AES finalists, designed by Ross Anderson, Eli
Biham and Lars Knudsen. Thus, the interface and properties are similar
to AES'. One pecularity is that it is quite pointless to use it with
anything but the maximum key size, smaller keys are just padded to
larger ones. Nettle defines SERPENT in @file{<nettle/serpent.h>}.

@deftp {Context struct} {struct serpent_ctx}
@end deftp

@defvr Constant SERPENT_BLOCK_SIZE
The SERPENT blocksize, 16
@end defvr

@defvr Constant SERPENT_MIN_KEY_SIZE
Minumim SERPENT key size, 16
@end defvr

@defvr Constant SERPENT_MAX_KEY_SIZE
Maximum SERPENT key size, 32
@end defvr

@defvr Constant SERPENT_KEY_SIZE
Default SERPENT key size, 32
@end defvr

@deftypefun void serpent_set_key (struct serpent_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. 
@end deftypefun

@deftypefun void serpent_encrypt (struct serpent_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{dst}, uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not overlap
in any other way.
@end deftypefun

@deftypefun void serpent_decrypt (struct serpent_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{dst}, uint8_t *@var{src})
Analogous to @code{serpent_encrypt}
@end deftypefun

Niels Möller's avatar
Niels Möller committed
900 901

@subsection TWOFISH
902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939
Another AES finalist, this one designed by Bruce Schneier and others.
Nettle defines it in @file{<nettle/twofish.h>}.

@deftp {Context struct} {struct twofish_ctx}
@end deftp

@defvr Constant TWOFISH_BLOCK_SIZE
The TWOFISH blocksize, 16
@end defvr

@defvr Constant TWOFISH_MIN_KEY_SIZE
Minumim TWOFISH key size, 16
@end defvr

@defvr Constant TWOFISH_MAX_KEY_SIZE
Maximum TWOFISH key size, 32
@end defvr

@defvr Constant TWOFISH_KEY_SIZE
Default TWOFISH key size, 32
@end defvr

@deftypefun void twofish_set_key (struct twofish_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. 
@end deftypefun

@deftypefun void twofish_encrypt (struct twofish_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{dst}, uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not overlap
in any other way.
@end deftypefun

@deftypefun void twofish_decrypt (struct twofish_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{dst}, uint8_t *@var{src})
Analogous to @code{twofish_encrypt}
@end deftypefun

Niels Möller's avatar
Niels Möller committed
940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976
@c @node nettle_cipher, Cipher Block Chaining, Cipher functions, Reference
@c @comment  node-name,  next,  previous,  up
@subsection @code{struct nettle_cipher}

Nettle includes a struct including information about some of the more
regular cipher functions. It should be considered a little experimental,
but can be useful for applications that need a simple way to handle
various algorithms. Nettle defines these structs in
@file{<nettle/nettle-meta.h>}. 

@deftp {Meta struct} @code{struct nettle_cipher} name context_size block_size key_size set_encrypt_key set_decrypt_key encrypt decrypt
The last four attributes are function pointers, of types
@code{nettle_set_key_func} and @code{nettle_crypt_func}. The first
argument to these functions is a @code{void *} pointer to a context
struct, which is of size @code{context_size}.
@end deftp

@deftypevr {Constant Struct} {struct nettle_cipher} nettle_aes128
@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_aes192
@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_aes256

@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_arcfour128
@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_cast128

@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_serpent128
@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_serpent192
@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_serpent256

@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_twofish128
@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_twofish192
@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_twofish256

Nettle includes such structs for all the @emph{regular} ciphers, i.e.
ones without weak keys or other oddnesses.
@end deftypevr

@node Cipher Block Chaining, Keyed hash functions, Cipher functions, Reference
977 978 979
@comment  node-name,  next,  previous,  up
@section Cipher Block Chaining

Niels Möller's avatar
Niels Möller committed
980 981 982 983 984 985 986 987
When using @acronym{CBC} mode, cleartext blocks are not encrypted
independently of each other, like in Electronic Cook Book mode. Instead,
when encrypting a block in @acronym{CBC} mode, the previous ciphertext
block is XOR:ed with the cleartext before it is fed to the block cipher.
When encrypting the first block, a random block called an @dfn{IV}, or
Initialization Vector, is used as the ``previous ciphertext block''. The
IV should be chosen randomly, but it need not be kept secret, and can
even be transmitted in the clear together with the encrypted data.
988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002

In symbols, if @code{E_k} is the encryption function of a blockcipher,
and @code{IV} is the initialization vector, then @code{n} cleartext blocks
@code{M_1},@dots{} @code{M_n} are transformed into @code{n} ciphertext blocks
@code{C_1},@dots{} @code{C_n} as follows:

@example
C_1 = E_k(IV  XOR M_1)
C_2 = E_k(C_1 XOR M_2)

@dots{}

C_n = E_k(C_(n-1) XOR M_n)
@end example

1003
Nettle includes a few utility functions for applying a block cipher in
Niels Möller's avatar
Niels Möller committed
1004
Cipher Block Chaining (@acronym{CBC}) mode. The functions uses @code{void *} to
1005 1006 1007 1008 1009
pass cipher contexts around.

@deftypefun {void} cbc_encrypt (void *@var{ctx}, void (*@var{f})(), unsigned @var{block_size}, uint8_t *@var{iv}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
@deftypefunx {void} cbc_decrypt (void *@var{ctx}, void (*@var{f})(), unsigned @var{block_size}, uint8_t *@var{iv}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})

Niels Möller's avatar
Niels Möller committed
1010 1011
Applies the encryption or decryption function @var{f} in @acronym{CBC}
mode. The function @var{f} is really typed as
1012 1013 1014 1015 1016 1017 1018

@code{void f (void *@var{ctx}, unsigned @var{length}, uint8_t @var{dst},
const uint8_t *@var{src})},

@noindent and the @code{cbc_encrypt} and @code{cbc_decrypt} functions pass their
argument @var{ctx} on to @var{f}.
@end deftypefun
1019

1020
There are also some macros to help use these functions correctly.
1021

1022
@deffn Macro CBC_CTX (@var{context_type}, @var{block_size})
1023 1024 1025 1026 1027 1028 1029
Expands into
@example
@{
   context_type ctx;
   uint8_t iv[block_size];
@}
@end example
1030 1031
@end deffn

Niels Möller's avatar
Niels Möller committed
1032
It can be used to define a @acronym{CBC} context struct, either directly,
1033

1034 1035 1036 1037 1038 1039 1040 1041 1042 1043
@example
struct CBC_CTX(struct aes_ctx, AES_BLOCK_SIZE) ctx;
@end example

or to give it a struct tag,

@example
struct aes_cbc_ctx CBC_CTX (struct aes_ctx, AES_BLOCK_SIZE);
@end example

1044
@deffn Macro CBC_SET_IV (@var{ctx}, @var{iv})
1045
First argument is a pointer to a context struct as defined by @code{CBC_CTX},
1046 1047 1048
and the second is a pointer to an Initialization Vector (IV) that is
copied into that context.
@end deffn
1049 1050 1051

@deffn Macro CBC_ENCRYPT (@var{ctx}, @var{f}, @var{length}, @var{dst}, @var{src})
@deffnx Macro CBC_DECRYPT (@var{ctx}, @var{f}, @var{length}, @var{dst}, @var{src})
1052 1053 1054 1055 1056
A simpler way to invoke @code{cbc_encrypt} and @code{cbc_decrypt}. The
first argument is a pointer to a context struct as defined by
@code{CBC_CTX}, and the second argument is an encryption or decryption
function following Nettle's conventions. The last three arguments define
the source and destination area for the operation.
1057
@end deffn
1058

1059 1060 1061
These macros use some tricks to make the compiler display a warning if
the types of @var{f} and @var{ctx} don't match, e.g. if you try to use
an @code{struct aes_ctx} context with the @code{des_encrypt} function.
1062

Niels Möller's avatar
Niels Möller committed
1063

1064
@node Keyed hash functions, Public-key algorithms, Cipher Block Chaining, Reference
Niels Möller's avatar
Niels Möller committed
1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263
@comment  node-name,  next,  previous,  up
@section Keyed Hash Functions

A @dfn{keyed hash function}, or @dfn{Message Authentication Code}
(@acronym{MAC}) is a function that takes a key and a message, and
produces fixed size @acronym{MAC}. It should be hard to compute a
message and a matching @acronym{MAC} without knowledge of the key. It
should also be hard to compute the key given only messages and
corresponding @acronym{MAC}s.

Keyed hash functions are useful primarily for message authentication,
when the Alice and Bob shares a secret: The sender, Alice, computes the
@acronym{MAC} and attaches it to the message. The receiver, Bob, also computes
the @acronym{MAC} of the message, using the same key, and compares that
to Alice's value. If they match, Bob can be assured that
the message has not been modified on it's way from Alice.

However, unlike digital signatures, this assurance is not transferable.
Bob can't show the message and the @acronym{MAC} to a third party and
prove that Alice sent that message. Not even if he gives away the key to
the third party. The reason is that the @emph{same} key is used on both
sides, and anyone knowing the key can create a correct @acronym{MAC} for
any message. If Bob believes that only he and Alice knows the key, and
he knows that he didn't attach a @acronym{MAC} to a particular message,
he knows it must be Alice who did it. However, the third party can't
distinguish between @acronym{MAC} created by Alice and one created by
Bob.

Keyed hash functions are typically a lot faster than digital signatures
as well.

@subsection @acronym{HMAC}

One can build keyed hash functions from ordinary hash functions. Older
constructions simply concatenate secret key and message and hashes that, but
such constructions have weaknesses. A better construction is
@acronym{HMAC}, described in @cite{RFC 2104}.

For an underlying hash function @code{H}, with digest size @code{l} and
internal block size @code{b}, @acronym{HMAC-H} is constructed as
follows: From a given key @code{k}, two distinct subkeys @code{k_i} and
@code{k_o} are constructed, both of length @code{b}. The
@acronym{HMAC-H} of a message @code{m} is then computed as @code{H(k_o |
H(k_i | m))}, where @code{|} denotes string concatenation.

@acronym{HMAC} keys can be of any length, but it is recommended to use
keys of length @code{l}, the digest size of the underlying hash function
@code{H}. Keys that are longer than @code{b} are shortened to length
@code{l} by hashing with @code{H}, so arbitrarily long keys aren't
very useful. 

Nettle's @acronym{HMAC} functions are defined in @file{<nettle/hmac.h>}.
There are abstract functions that use a pointer to a @code{struct
nettle_hash} to represent the underlying hash function and @code{void
*} pointers that point to three different context structs for that hash
function. There are also concrete functions for @acronym{HMAC-MD5},
@acronym{HMAC-SHA1}, and @acronym{HMAC-SHA256}. First, the abstract
functions:

@deftypefun void hmac_set_key (void *@var{outer}, void *@var{inner}, void *@var{state}, const struct nettle_hash *@var{H}, unsigned @var{length}, const uint8_t *@var{key})
Initializes the three context structs from the key. The @var{outer} and
@var{inner} contexts corresponds to the subkeys @code{k_o} and
@code{k_i}. @var{state} is used for hashing the message, and is
initialized as a copy of the @var{inner} context.
@end deftypefun

@deftypefun void hmac_update(void *@var{state}, const struct nettle_hash *@var{H}, unsigned @var{length}, const uint8_t *@var{data})
This function is called zero or more times to process the message.
Actually, @code{hmac_update(state, H, length, data)} is equivalent to
@code{H->update(state, length, data)}, so if you wish you can use the
ordinary update function of the underlying hash function instead.
@end deftypefun

@deftypefun void hmac_digest (const void *@var{outer}, const void *@var{inner}, void *@var{state}, const struct nettle_hash *@var{H}, unsigned @var{length}, uint8_t *@var{digest})
Extracts the @acronym{MAC} of the message, writing it to @var{digest}.
@var{outer} and @var{inner} are not modified. @var{length} is usually
equal to @code{H->digest_size}, but if you provide a smaller value,
only the first @var{length} octets of the @acronym{MAC} are written.

This function also resets the @var{state} context so that you can start
over processing a new message (with the same key).
@end deftypefun

Like for @acronym{CBC}, there are some macros to help use these
functions correctly.

@deffn Macro HMAC_CTX (@var{type})
Expands into
@example
@{
   type outer;
   type inner;
   type state;
@}
@end example
@end deffn

It can be used to define a @acronym{HMAC} constext struct, either
directly,

@example
struct HMAC_CTX(struct md5_ctx) ctx;
@end example

or to give it a struct tag,

@example
struct hmac_md5_ctx HMAC_CTX (struct md5_ctx);
@end example

@deffn Macro HMAC_SET_KEY (@var{ctx}, @var{H}, @var{length}, @var{key})
@var{ctx} is a pointer to a context struct as defined by
@code{HMAC_CTX}, @var{H} is a pointer to a @code{const struct
nettle_hash} describing the underlying hash function (so it must match
the type of the components of @var{ctx}). The last two arguments specify
the secret key.
@end deffn

@deffn Macro HMAC_DIGEST (@var{ctx}, @var{H}, @var{length}, @var{digest})
@var{ctx} is a pointer to a context struct as defined by
@code{HMAC_CTX}, @var{H} is a pointer to a @code{const struct
nettle_hash} describing the underlying hash function. The last two
arguments specify where the digest is written.
@end deffn

Note that there is no @code{HMAC_UPDATE} macro; simply call hmac_update
function directly, or the update function of the underlying hash function.

@subsection Concrete @acronym{HMAC} functions
Now we come to the specialized @acronym{HMAC} functions, which are
easier to use than the general @acronym{HMAC} functions.

@subsubsection @acronym{HMAC-MD5}

@deftp {Context struct} {struct hmac_md5_ctx}
@end deftp

@deftypefun void hmac_md5_set_key (struct hmac_md5_ctx *@var{ctx}, unsigned @var{key_length}, const uint8_t *@var{key})
Initializes the context with the key.
@end deftypefun

@deftypefun void hmac_md5_update (struct hmac_md5_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Process some more data.
@end deftypefun

@deftypefun void hmac_md5_digest (struct hmac_md5_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Extracts the @acronym{MAC}, writing it to @var{digest}. @var{length} may be smaller than
@code{MD5_DIGEST_SIZE}, in which case only the first @var{length}
octets of the @acronym{MAC} are written.

This function also resets the context for processing new messages, with
the same key.
@end deftypefun

@subsubsection @acronym{HMAC-SHA1}

@deftp {Context struct} {struct hmac_sha1_ctx}
@end deftp

@deftypefun void hmac_sha1_set_key (struct hmac_sha1_ctx *@var{ctx}, unsigned @var{key_length}, const uint8_t *@var{key})
Initializes the context with the key.
@end deftypefun

@deftypefun void hmac_sha1_update (struct hmac_sha1_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Process some more data.
@end deftypefun

@deftypefun void hmac_sha1_digest (struct hmac_sha1_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Extracts the @acronym{MAC}, writing it to @var{digest}. @var{length} may be smaller than
@code{SHA1_DIGEST_SIZE}, in which case only the first @var{length}
octets of the @acronym{MAC} are written.

This function also resets the context for processing new messages, with
the same key.
@end deftypefun


@subsubsection @acronym{HMAC-SHA256}

@deftp {Context struct} {struct hmac_sha256_ctx}
@end deftp

@deftypefun void hmac_sha256_set_key (struct hmac_sha256_ctx *@var{ctx}, unsigned @var{key_length}, const uint8_t *@var{key})
Initializes the context with the key.
@end deftypefun

@deftypefun void hmac_sha256_update (struct hmac_sha256_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Process some more data.
@end deftypefun

@deftypefun void hmac_sha256_digest (struct hmac_sha256_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Extracts the @acronym{MAC}, writing it to @var{digest}. @var{length} may be smaller than
@code{SHA256_DIGEST_SIZE}, in which case only the first @var{length}
octets of the @acronym{MAC} are written.

This function also resets the context for processing new messages, with
the same key.
@end deftypefun

1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284
@node Public-key algorithms, Randomness, Keyed hash functions, Reference
@comment  node-name,  next,  previous,  up
@section Public-key algorithms

Nettle uses @acronym{GMP}, the GNU bignum library, for all calculations
with large numbers. In order to use the public-key features of Nettle,
you must install @acronym{GMP}, at least version 3.0, before compiling
Nettle, and you need to link your programs with @code{-lgmp}.

The concept of @dfn{Public-key} encryption and digital signatures was
discovered by Whitfield Diffie and Martin E. Hellman and described in a
paper 1976. In traditional, "symmetric", cryptography, sender and
receiver share the same keys, and these keys must be distributed in a
secure way. And if there are many users or entities that need to
communicate, each @emph{pair} needs a shared secret key known by nobody
else.

Public-key cryptography uses trapdoor one-way functions. A
@dfn{one-way function} is a function @code{F} such that it is easy to
compute the value @code{F(x)} for any @code{x}, but given a value
@code{y}, it is hard to compute a corresponding @code{x} such that
1285
@code{y = F(x)}. Two examples are cryptographic hash functions, and
1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342
exponentiation in certain groups.

A @dfn{trapdoor one-way function} is a function @code{F} that is
one-way, unless one knows some secret information about @code{F}. If one
knows the secret, it is easy to compute both @code{F} and it's inverse.
If this sounds strange, look at the @acronym{RSA} example below.

Two important uses for one-way functions with trapdoors are public-key
encryption, and digital signatures. Of these, I won't say more about
public-key encryption, as that isn't yet supported by Nettle. So the
rest of this chapter is about digital signatures.

To use a digital signature algorithm, one must first create a
@dfn{keypair}: A public key and a corresponding private key. The private
key is used to sign messages, while the public key is used for verifying
that that signatures and messages match. Some care must be taken when
distributing the public key; it need not be kept secret, but if a bad
guy is able to replace it (in transit, or in some user's list of known
public keys), bad things may happen.

There are two operations one can do with the keys. The signature
operation takes a message and a private key, and creates a signature for
the message. A signature is some string of bits, usually at most a few
thousand bits or a few hundred octets. Unlike paper-and-ink signatures,
the digital signature depends on the message, so one can't cut it out of
context and glue it to a different message.

The verification operation takes a public key, a message, and a string
that is claimed to be a signature on the message, and returns true or
false. If it returns true, that means that the three input values
matched, and the verifier can be sure that someone went through with the
signature operation on that very message, and that the "someone" also
knows the private key corresponding to the public key.

The desired properties of a digital signature algorithm are as follows:
Given the public key and pairs of messages and valid signatures on them,
it should be hard to compute the private key, and it should also be hard
to create a new message and signature that is accepted by the
verification operation.

Besides signing meaningful messages, digital signatures can be used for
authorization. A server can be configured with a public key, such that
any client that connects to the service is given a random nonce message.
If the server gets a reply with a correct signature matching the nonce
message and the configured public key, the client is granted access. So
the configuration of the server can be understood as "grant access to
whoever knows the private key corresponding to this particular public
key, and to no others".

@subsection @acronym{RSA}

The @acronym{RSA} was the first practical digital signature algorithm
that was constructed. It was described 1978 in a paper by Ronald Rivest,
Adi Shamir and L.M. Adleman, and the technique was also patented in
1983. The patent expired on September 20, 2000, and since that day,
@acronym{RSA} can be used freely.

1343
It's remarkably simple to describe the trapdoor function behind
1344 1345 1346 1347 1348 1349 1350 1351
@acronym{RSA}. The "one-way"-function used is

@example
F(x) = x^e mod n
@end example

I.e. raise x to the @code{e}:th power, while discarding all multiples of
@code{n}. The pair of numbers @code{n} and @code{e} is the public key.
1352
@code{e} can be quite small, even @code{e = 3} has been used, although
1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395
slightly larger numbers are recommended. @code{n} should be about 1000
bits or larger.

If @code{n} is large enough, and properly chosen, the inverse of F,
the computation of @code{e}:th roots modulo @code{n}, is very difficult.
But, where's the trapdoor?

Let's first look at how @acronym{RSA} keypairs are generated. First
@code{n} is chosen as the product of two large prime numbers @code{p}
and @code{q} of roughly the same size (so if @code{n} is 1000 bits,
@code{p} and @code{q} are about 500 bits each). One also computes the
number @code{phi = (p-1)(q-1)}, in mathematical speak, phi is the order
of the multiplicative group of integers modulo n.

Next, @code{e} is chosen. It must have no factors in common with phi (in
particular, it must be odd), but can otherwise be chosen more or less
randomly. @code{e = 65537} is a popular choice, because it makes raising
to the @code{e}:th power particularly efficient, and being prime, it
usually has no factors common with @code{phi}.

Finally, a number @code{d}, @code{d < n} is computed such that @code{e d
mod phi = 1}. It can be shown that such a number exists (this is why
@code{e} and @code{phi} must have no common factors), and that for all x,

@example
(x^e)^d mod n = x^(ed) mod n = (x^d)^e mod n = x
@end example

Using Euclid's algorithm, @code{d} can be computed quite easily from
@code{phi} and @code{e}. But it is still hard to get @code{d} without
knowing @code{phi}, which depends on the factorization of @code{n}.

So @code{d} is the trapdoor, if we know @code{d} and @code{y = F(x)}, we can
recover x as @code{y^d mod n}. @code{d} is also the private half of
the @acronym{RSA} keypair.

The most common signature operation for @acronym{RSA} is defined in
@cite{PKCS#1}, a specification by RSA Laboratories. The message to be
signed is first hashed using a cryptographic hash function, e.g.
@acronym{MD5} or @acronym{SHA1}. Next, some padding, the @acronym{ASN.1}
"Algorithm Identifier" for the hash function, and the message digest
itself, are concatenated and converted to a number @code{x}. The
signature is computed from @code{x} and the private key as @code{s = x^d
1396
mod n}@footnote{Actually, the computation is not done like this, it is
1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442
done more efficiently using @code{p}, @code{q} and the chinese remainder
theorem (@acronym{CRT}). But the result is the same.}. The signature, @code{s} is a
number of about the same size of @code{n}, and it usually encoded as a
sequence of octets, most significant octet first.

The verification operation is straight-forward, @code{x} is computed
from the message in the same way as above. Then @code{s^e mod n} is
computed, the operation returns true if and only if the result equals
@code{x}.

@subsection Nettle's @acronym{RSA} support

Nettle represents @acronym{RSA} keys using two structures that contain
large numbers (of type @code{mpz_t}).

@deftp {Context struct} {rsa_public_key} size n e
@code{size} is the size, in octets, of the modulo, and is used internally.
@code{n} and @code{e} is the public key.
@end deftp

@deftp {Context struct} {rsa_private_key} size d p q a b c
@code{size} is the size, in octets, of the modulo, and is used internally.
@code{d} is the secret exponent, but it is not actually used when
signing. Instead, the factors @code{p} and @code{q}, and the parameters
@code{a}, @code{b} and @code{c} are used. They are computed from @code{p},
@code{q} and @code{d} such that @code{a e mod (p - 1) = 1, b e mod (q -
1) = 1, c q mod p= 1}.
@end deftp

Before use, these structs must be initialized by calling one of

@deftypefun void rsa_init_public_key (struct rsa_public_key *@var{pub})
@deftypefunx void rsa_init_private_key (struct rsa_private_key *@var{key})
Calls @code{mpz_init} on all numbers in the key struct.
@end deftypefun

and when finished with them, the space for the numbers must be
deallocated by calling one of

@deftypefun void rsa_clear_public_key (struct rsa_public_key *@var{pub})
@deftypefunx void rsa_clear_private_key (struct rsa_private_key *@var{key})
Calls @code{mpz_clear} on all numbers in the key struct.
@end deftypefun

In general, Nettle's @acronym{rsa} functions deviates from Nettle's "no
memory allocation"-policy. Space for all the numbers, both in the key structs
1443
above, and temporaries, are allocated dynamically. For information on how
1444
to customize allocation, see @xref{Custom Allocation,,GMP Allocation,gmp}.
Niels Möller's avatar
Niels Möller committed
1445

1446
When you have assigned values to the attributes of a key, you must call
Niels Möller's avatar
Niels Möller committed
1447

1448 1449 1450
@deftypefun int rsa_prepare_public_key (struct rsa_public_key *@var{pub})
@deftypefunx int rsa_prepare_private_key (struct rsa_private_key *@var{key})
Computes the octet size of the key (stored in the @code{size} attribute,
1451
and may also do other basic sanity checks. Returns one if successful, or
1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476
zero if the key can't be used, for instance if the modulo is smaller
than the minimum size specified by PKCS#1.
@end deftypefun

Before signing or verifying a message, you first hash it with the
appropriate hash function. You pass the hash function's context struct
to the rsa function, and it will extract the message digest and do the
rest of the work.

Creation and verification of signatures is done with the following functions:

@deftypefun void rsa_md5_sign (struct rsa_private_key *@var{key}, struct md5_ctx *@var{hash}, mpz_t @var{signature})
@deftypefunx void rsa_sha1_sign (struct rsa_private_key *@var{key}, struct sha1_ctx *@var{hash}, mpz_t @var{signature})
The signature is stored in @var{signature} (which must have been
@code{mpz_init}:ed earlier). The hash context is reset so that it can be
used for new messages.
@end deftypefun

@deftypefun int rsa_md5_verify (struct rsa_public_key *@var{key}, struct md5_ctx *@var{hash}, const mpz_t @var{signature})
@deftypefunx int rsa_sha1_verify (struct rsa_public_key *@var{key}, struct sha1_ctx *@var{hash}, const mpz_t @var{signature})
Returns 1 if the signature is valid, or 0 if it isn't. In either case,
the hash context is reset so that it can be used for new messages.
@end deftypefun

If you need to use the @acronym{RSA} trapdoor, the private key, in a way
1477
that isn't supported by the above functions Nettle also includes a
1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520
function that computes @code{x^d mod n} and nothing more, using the
@acronym{CRT} optimization.

@deftypefun void rsa_compute_root (struct rsa_private_key *@var{key}, mpz_t @var{x}, const mpz_t @var{m})
Computes @code{x = m^d}, efficiently.
@end deftypefun

At last, how do you create new keys?

@deftypefun int rsa_generate_keypair (struct rsa_public_key *@var{pub}, struct rsa_private_key *@var{key}, void *@var{random_ctx}, nettle_random_func @var{random}, void *@var{progress_ctx}, nettle_progress_func @var{progress}, unsigned @var{n_size}, unsigned @var{e_size});
There are lots of parameters. @var{pub} and @var{key} is where the
resulting key pair is stored. The structs should be initialized, but you
don't need to call @code{rsa_prepare_public_key} or
@code{rsa_prepare_private_key} after key generation.

@var{random_ctx} and @var{random} is a randomness generator.
@code{random(random_ctx, length, dst)} should generate @code{length}
random octets and store them at @code{dst}. For advice, see
@xref{Randomness}.

@var{progress} and @var{progress_ctx} can be used to get callbacks
during the key generation process, in order to uphold an illusion of
progress. @var{progress} can be NULL, in that case there are no
callbacks.

@var{size_n} is the desired size of the modulo, in bits. If @var{size_e}
is non-zero, it is the desired size of the public exponent and a random
exponent of that size is selected. But if @var{e_size} is zero, it is
assumed that the caller has already chosen a value for @code{e}, and
stored it in @var{pub}.

Returns 1 on success, and 0 on failure. The function can fail for
example if if @var{n_size} is too small, or if @var{e_size} is zero and
@code{pub->e} is an even number.
@end deftypefun

@node Randomness, Miscellaneous functions, Public-key algorithms, Reference
@comment  node-name,  next,  previous,  up
@section Randomness

XXX Not yet written.

@node Miscellaneous functions, Compatibility functions, Randomness, Reference
Niels Möller's avatar
Niels Möller committed
1521 1522 1523
@comment  node-name,  next,  previous,  up
@section Miscellaneous functions

1524 1525 1526 1527 1528 1529
@deftypefun {uint8_t *} memxor (uint8_t *@var{dst}, const uint8_t *@var{src}, size_t @var{n})
XOR:s the source area on top of the destination area. The interface
doesn't follow the Nettle conventions, because it is intended to be
similar to the ANSI-C @code{memcpy} function.
@end deftypefun

1530 1531
@code{memxor} is declared in @file{<nettle/memxor.h>}.

1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558
@node Compatibility functions,  , Miscellaneous functions, Reference
@comment  node-name,  next,  previous,  up
@section Compatibility functions

For convenience, Nettle includes alternative interfaces to some
algorithms, for compatibilty with some other popular crypto toolkits.
These are not fully documented here; refer to the source or to the
documentation for the original implementation.

MD5 is defined in [RFCXXX], which includes a reference implementation.
Nettle defines a compatible interface to MD5 in
@file{<nettle/md5-compat.h>}. This file defines the typedef
@code{MD5_CTX}, and declares the functions @code{MD5Init}, @code{MD5Update} and
@code{MD5Final}.

Eric Young's "libdes" (also part of OpenSSL) is a quite popular DES
implementation. Nettle includes a subset if it's interface in
@file{<nettle/des-compat.h>}. This file defines the typedefs
@code{des_key_schedule} and @code{des_cblock}, two constants
@code{DES_ENCRYPT} and @code{DES_DECRYPT}, and declares one global
variable @code{des_check_key}, and the functions @code{des_cbc_cksum}
@code{des_cbc_encrypt}, @code{des_ecb2_encrypt},
@code{des_ecb3_encrypt}, @code{des_ecb_encrypt},
@code{des_ede2_cbc_encrypt}, @code{des_ede3_cbc_encrypt},
@code{des_is_weak_key}, @code{des_key_sched}, @code{des_ncbc_encrypt}
@code{des_set_key}, and @code{des_set_odd_parity}.

Niels Möller's avatar
Niels Möller committed
1559 1560 1561 1562 1563 1564 1565
@node Nettle soup, Installation, Reference, Top
@comment  node-name,  next,  previous,  up
@chapter Traditional Nettle Soup
For the serious nettle hacker, here is a recipe for nettlesoup.

4 servings

1566 1567
@itemize @w
@item
Niels Möller's avatar
Niels Möller committed
1568
1 litre fresh nettles (urtica dioica)
1569
@item
Niels Möller's avatar
Niels Möller committed
1570
2 tablespoons butter
1571
@item
Niels Möller's avatar
Niels Möller committed
1572
3 tablespoons flour
1573
@item
Niels Möller's avatar
Niels Möller committed
1574
1 litre buillon (meat or vegetable)
1575
@item
Niels Möller's avatar
Niels Möller committed
1576
1/2 teaspoon salt
1577
@item
Niels Möller's avatar
Niels Möller committed
1578
a tad white pepper
1579
@item
Niels Möller's avatar
Niels Möller committed
1580
some cream or milk
1581
@end itemize
Niels Möller's avatar
Niels Möller committed
1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597

Gather 1 ltre fresh nettles. Use gloves! Small, tender shoots are
preferable but the tops of larger nettles can also be used.

@c replace "hack" with "chop"?

Rinse the nettles very well. Boil them for 10 minutes in lightly salted
water. Strain the nettles and save the water. Hack the nettles. Melt the
butter and mix in the flour. Dilute with buillon and the nettlewater you
save earlier. Add the hacked nettles. If you wish you can add some milk
or cream at this stage. Bring to a boil and let boil for a few minutes.
Season with salt and pepper.

Serve with boiled egghalves.

@c And the original Swedish version.
1598
@ignore
Niels Möller's avatar
Niels Möller committed
1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621

Recept på nässelsoppa
4 portioner

1 l färska nässlor
2 msk smör
3 msk vetemjöl
1 l kött- eller grönsaksbuljong
1/2 tsk salt
1-2 krm peppar
(lite grädde eller mjölk)

Plocka 1 liter färska nässlor. Använd handskar! Helst små och späda
skott, men topparna av större nässlor går också bra.

Skölj nässlorna väl. Förväll dem ca 10 minuter i lätt saltat vatten.
Häll av och spara spadet. Hacka nässlorna. Smält smöret, rör i mjöl och
späd med buljong och nässelspad. Lägg i de hackade nässlorna. Om så
önskas, häll i en skvätt mjölk eller grädde. Koka några minuter, och
smaksätt med salt och peppar.

Servera med kokta ägghalvor.
@end ignore
1622

Niels Möller's avatar
Niels Möller committed
1623
@node Installation, Index, Nettle soup, Top
Niels Möller's avatar
Niels Möller committed
1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636
@comment  node-name,  next,  previous,  up
@chapter Installation

Nettle uses @command{autoconf} and @command{automake}. To build it,
unpack the source and run

@example
./configure
make
make check
make install
@end example

1637
@noindent
Niels Möller's avatar
Niels Möller committed
1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650
to install in the default location, @file{/usr/local}. The library is
installed in @file{/use/local/lib/libnettle.a} and the include files are
installed in @file{/use/local/include/nettle/}.

Only static libraries are installed.

@node Index,  , Installation, Top
@comment  node-name,  next,  previous,  up
@unnumbered Function and Concept Index

@printindex cp

@bye